INTRODUCTION: PulseCAP10 fuel level sensor is designed for precision measurement in all kinds of vehicle tank.
PulseCAP10 is used as a standard fuel level sensor or vehicle tracking systems.
Obtain the reliable information about current fuel volume in vehicle tank.
Define the vehicle fueling volume and detect the fuel theft from the tank.
To carry out the remote tank monitoring and determine the fuel consumption.
HIGHLIGHT FEATURES: Easy Installation Intelligent structure with full accessories for easy installation at site
Smart Firmware Smart firmware allows cutting the sensor down to the minimum size (200mm)
High Stability Output Even on rough terrain or in temperature shocks
High Linearity Output Using digital capacitance measurement technology to achieve highest linearity with lowest temperature drift.
Highest Protection with lead sealing Many Output Types Frequency, Pulse, Analog, Serial
Used for many kinds of tank: Fuel tank for Generators, Ships, Vehicles, ...
Fuel tank in Industial Plants...
Fluids: Diesel oil
Fuel oil
Lubricant
Vegetables oil
...
SPECIFICATION | SENSOR LENGTH | Standard Length: 700, 1000, 1200, 1500, 2000, 2500, 3000, 3500 mm |
| OUTPUT | Frequency: 50 .. 1050 Hz, 5 Vp-p
Pulse Width: 1.7 sec cycle, 5 Vp-p
Analog: 1.00 .. 5.00 Vdc
RS232: Tx, DS Protocol, 5 Vp-p
RS485: Modbus RTU |
| POWER SUPPLY | 8..50 VDC for output: analog, pulse, frequency and RS 232
5..50 VDC for output: Modbus RS485
Current Consumption: max 15mA |
| PRESSURE/ TEMPERATURE | Vaccuum .. 2 barg/ -40oC .. +85oC |
| PERFORMANCE | Output Linearity: +/- 0.5% of Span (at 25oC)
Temperature drift: < +0.03% of Span per 10oC |
| RESOLUTION | 1/1000 of span |
| SENSOR MATERIALS | Cast Aluminum, Thermal plastic |
| ELECTRICAL CONNECTOR | 3-way connector, IP67 with 7m PVC cable, 3-core |
| HOUSING/ RATING | Cast Aluminum/ IP67 |
| PROCESS CONNECTION | 4-bolt Flange |
| ACCESSORIES | 4-bolt Flange, Rubber Gasket 5mm, Ruber Gasket 2mm, Flange seal cover, M4 hex bolt.
Connector cable with M12 connector (order seperately) |
| CERTIFICATE | CE-Marking; Standard: EN61236-1 |
