The Pro Race Model was developed for advanced riders and competition use, there is no bilge pump in the exhaust, it is made out of light weight carbon fiber, there is NO WARRANTY.
This Model is suitable for competition use in the Jetsurf World Series.
DIMENSIONS
| Length |
1800mm |
| Width |
600mm |
| Height |
150mm |
| Weight |
14kg (ready to race including fuel) |
| Max Load |
110 kg |
| Fuel Capacity |
2.5 L |
| Range Approx |
2L / hour |
DRIVE UNIT
| Propulsion System |
Jet-Pump Direct Drive |
| Racing Pump with |
Carbon Fiber; Axial Flow; High Performance Single Stage |
| Racing Impeller |
Carbon Fiber |
ENGINE
| Type |
2 Stroke Engine specially developed by MSR Engines for Jetsurf |
| Displacement |
100cc / 11.000 RPM |
| Cooling |
Water Cooled Open Loop |
| Fuel Type |
Unleaded 95 octane or higher; Full Synthetic 2 Stroke Racing Oil; Fuel / Oil Mix 30:1 |
| Top Speed |
57km/h |
ELECTRICAL
| Ignition |
Automatic Start / Stop |
| Starter |
Electric |
| Battery |
Li-FePO4. The engine does not recharge the battery; there is no accumulator which will give you approximately 150 starts or 4 hours of continuous riding without recharging. Recharging takes approximately 45min. and can be done via a car cigarette lighter output or socket. |
COMPONENTS
Central Fin
Lateral Fins
Special Racing Pads with Straps
Dark Silver Racing Design
NO WARRANTY
