FE 100 R/L magnetic drilling machine, suited for any task you can think off. A more complete mag drill you cannot wish for. With the exchangable morse taper 3 you can drill with hole cutters up to 100 mm, cut thread up to M30 and use twist drills up to 31.75 mm. This magnetic drill is powered by a strong 1800 watt Eibenstock motor. The motor is equipped with a torque control, enabling you to have full control over your drilling operations. A continuous internal coolant system is an optional supply for this mag drill. Please check our cutting oil section of our website. To be able to use other manufacurers cutters in the FE 100 R/L please check out the adapter section on our website
All our mag drills machines can be supplied in 110 Volt as well as in 230 Volt.
Product specifications:
Motor power: 1800 Watt
Spindle: Morse taper 3 - 19 mm (3/4") Weldon
Hole cutter / annular cutter short (30 mm): 100 mm (4")
Hole cutter / annular cutter long (55 mm): 100 mm (4")
Hole cutter / annular cutter extra long (110 mm): 50 mm (2")
Countersink: 50 mm (2")
Reaming: 31.75 mm (1-1/4")
Twist drills: 31.75 mm (1-1/5")
Tapping: M30
RPM: I 40-140 min-1 - II 120-480 min-1
Stroke: 250 mm (9.85")
Weight: 27 Kgs (59.5 Lbs)
Magnet power: 3500 kgs (7716 Lbs)
Product is standard delivered/ equipped with:
1 mag drill
1 Morse taper no 3
1 pilot pin FEPP 75 ( 6.35x79 mm)
1 pilot pin FEPP 100 ( 6.35x103 mm)
1 pilot pin FEPP 90 ( 8.0x90 mm)
1 pilot pin FEPP 120 ( 8.0x122 mm)
1 Morse taper no 3 remover
1 transport carrying case
1 morse taper no 3 remover
1 safety chain
1 manual
This is one of our own brand products, our prizes are in Euro. We guarantee high quality, long lasting machines and a great support from us. for more and specific information about us or our products please contact us or visit our website.
