E1701D digital XY2/100 scanner controller card is a low-cost scanner card with the smallest ground-size out there providing different signals and outputs. So it is not necessary to buy one fully featured card and to pay for functions that are not needed. Via its extension boards only these functions and I/Os can be added, that are really required.
These extension boards are plugged onto baseboard. Several of them can be combined freely according to required functionality.
E1701 provides following features:
USB 2.0 connectionstand-by frequency), running with frequencies up to 20 MHz
LP8 8 bit CMOS level parallel digital output e.g. for controlling laser power
LP8 latch CMOS level digital output for usage with IPG™ and compatible laser types
Master Oscillator CMOS level digital output for usage with IPG™ and compatible laser types
8 bit 0..5V analogue output e.g. for controlling laser power
8 digital inputs and 8 digital outputs can be switched to opto-insulated mode with external power supply of up to 24 V
2 inputs can be used for 90 degree phase-shifted encoder signal for marking on-the-fly applications
inputs can be used to select one of up to 256 stand-alone marking jobs stored on microSD card of baseboard
512 MByte DDR3 RAM
1 GHz CPU clock
support for Micro-SD and Micro-SDHC cards
extremely low power consumption of about 1, 8 W (Baseboard without any Extension Boards)
internal command and vector data list with more than 20 million entries
continuous list concept, no need to swap between lists
BeamConstruct PRO license included
open source compatibility library that emulates existing programming interface for fast and easy usage with existing software (contains e.g. Scanlab™ RTC4™, SCAPS™ USC™/SCI and other compatible interfaces)
very small size of about 87 mm x 55 mm
hardware/firmware is quality made in EU/Germany
