| Ball press machine introduction: | Ball press machine is the raw material directly after crushing machine production, without adding water. Such as: aluminum powder, activated alumina, lime, etc., the aim is to reduce dust control capacity, the return to the use, improve the transport properties design capacity. |
| Principle of the ball press machine | After belts, spread reducer, reducer through the coupling, and then transmitted to the drive shaft by a split gear, to ensure the synchronization of two rollers material storage silo hopper evenly into the molding equipment by quantitative so that the material forming pressure units from small to large, in the center of the roll forming pressure connection at the maximum, the material through the line, the pressure rapidly forming the material into smaller balls off state, smooth off the ball. |
| Features | 1.Molding pressure, the host rpm adjustable with screw feeding device. 2.ball press machine with the ball high, low power consumption, the obvious advantages compact for easy maintenance and debugging. 3.Pressure ball density requirements to adjust the pressure and production flexibility. |
| Technical parameters | | Model | Reducer | The dimension of pressing roll | Speed of main shaft(r/min) | Power of motor(kw) | Output (t/h) | | The width | The diameter | | HYXM360 | ZQ350 | 250mm | Φ360mm | 17-19 | 7.5 | 3-5 | | HYXM400 | ZQ400 | 280mm | Φ400mm | 14-16 | 11~15 | 6-9 | | HYXM500 | ZQ500 | 300mm | Φ500mm | 12-14 | 18.5~22 | 10-11 | | HYXM650 | ZQ650 | 336mm | Φ650mm | 12-14 | 20~30 | 12-20 | | HYXM750 | ZQ750 | 400mm | Φ750m | 12-14 | 45 | 25-30 | | HYXM850 | ZQ850 | 500mm | Φ850mm | 10-11 | 75 | 35-40 | | HYXM1250 | ZQ1250 | 650mm | Φ125mm | 10-11 | 130 | 40-45 | | Notice:The spherical size is designed by need, but the common used is 30-60mm. |
|
| Structural composition | Pressure the ball machine structure consists of three parts:the feed section; transmission parts; molding parts. 1, feeding part, is to achieve dosing to ensure access to the material evenly between the rolls. 2, transmission parts, main drive system are:motor - a triangle with - open gear reducer - roll. 3, forming part of, mainly referring to host part of the core part of the roll. |
| Services for customer | 1.Our professional service includes: Free training, Guidance Installation and Debugging. 2.Guaranteed Time: |
