I.Feeding feature by PLC program from MITSUBISHI
1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan.
The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on.
2.High precision feeding: to meet the coming of hi-tech industry, controlled by computer closed circuit feedback system to keep precision degree within +/-0.15mm
3.Feeding function: input 20 sets of different feed length, each group provides 999 times for punching or cutting to satisfy processing of special products.
4.High efficiency release device, match with adjustment of signal from the cutter or press machine through cable wire.
5.Setting of feed length: directly input feed length on the control plate, and then it can reach needed distance, feed length max 9999.99mm. speed max 100m/min
II. II.Standard Accessory
1.upper roller adjustment by digital watch .
2. Coil width adjusted by double handle wheel with precise screw rod .
3.Pass line can be adjusted by the lifter driven by motor .
4. uncoiler with four "A" steel backgauges .
5.Pinch roll and straightener roll material:high-strength alloy bearing steel with hard chrome plating.
6.Pneumatic coil arm device.
7.Mitsubishi PLC control feeding program from Japan .
8.Feed accuracy controlled by Japan YASKAWA servo motor with precise planetary reducer .
9.Feed accuracy controlled by Japan YASKAWA servo motor with precise planetary reducer .
III.Specifications: | Ltem / Model | TNCF4-300 | TNCF4-400 | TNCF4-500 | TNCF4-600 | TNCF4-700 | TNCF4-800 | TNCF4-1000 | TNCF4-1300 |
| Width of Material(mm) | 75-300 | 75-400 | 75-500 | 75-600 | 75-700 | 75-800 | 75-1000 | 75-1300 |
| Thickness of Material(mm) | 0.5-4.5 |
| Max.coil Weight(kg) | 2Tweight can be customized | 3Tweight can be customized | 5Tweight can be customized | 8Tweight can be customized |
| Coil L.D.(mm) | 508 |
| Max.Coil O.D.(mm) | 1500 |
| Max.Speed(m/min) | 16 |
| Feed Pitch Accuracy(mm) | ±0.15 |
| Feed ROLL | Upper1 / Lower1 |
| Straighten ROLL | Upper4 / Lower3 |
| Voltage | 380VAc / 60Hz |
| Air power supply | 5kg / CM² |
| Uncoiler Expansion | Hydraulic |
| Servo Motor(kw) | AC2.9with servo reducer | AC4.4with servo reducer | AC5.5with servo reducer |
| Uncoiler Motor(kw) | 1.5 KW | 2.2 KW | 3 KW |
| Coil Car | 1 optional | standard |
| Pass line | ±100 MM |
IV. Straightening performance:
| Model/Width/Thickness | 0.5 | 1.5 | 2 | 2.5 | 3 | 3.5 | 4 | 4.5 |
| TNCF4-300 | 300 | 260 | 200 |
| TNCF4-400 | 400 | 300 | 260 | 200 |
| TNCF4-500 | 500 | 400 | 300 | 260 | 200 |
| TNCF4-600 | 600 | 500 | 450 | 350 | 260 | 200 |
| TNCF4-700 | 700 | 550 | 450 | 350 | 260 | 200 |
| TNCF4-800 | 800 | 600 | 450 | 350 | 260 | 200 |
| TNCF4-1000 | 1000 | 800 | 600 | 450 | 350 | 260 | 200 |
| TNCF4-1300 | 1300 | 900 | 600 | 450 | 350 | 260 | 200 |
