| Technical Parameters |
| Communication Interface | USB Port |
| Laser Type | CO2 Gas |
| Tube Trigger Volt | 20KV |
| Tube Operating Volt | 15KV |
| Current | 18~22mA |
| Engraving Area | 12x8in.(30x20cm) |
| Maximum Item Size to Engrave | 10.25W x 8.75L x 2.85H in. |
| Laser Tube (life hours) 1500-2000 Hours |
| Laser Power | 40W |
| Engraving Speed | 0-180mm/s (0-7 in./s) |
| Cutting Speed | 0-18mm/s (0-0.7 in./s) |
| Minimum Shaping Character | 1 X 1mm (0.04 X0.04)in |
| Resolution Ratio | 0.026mm / 0.001 in. (1000dpi) |
| Power Supply | 110V/60Hz for USA, Canada, Japan etc.
220V~250V for other countries all over
the world. Please tell us what voltage
you want after you buy this item. |
| Resetting Positioning | less than 0.01mm (0.0004 in.) |
| Motor Type | Stepper Motor |
| Software Supported | CORELLASER (CAN SUPPORT CORELDRAW DIRECTLY).
It can support Window 7/8/vista/XP |
| Power Consumption | less than 250W |
| Operating Temperature | 32-113F (0-45C) |
| Graphic Format Supported | PLT/DXF/BMP/JPG/GIF/PGN/TIF etc |
| Water Cooling | Water Pump include |
| Recommended Spare Parts/Consumables | Laser Tube, Focal lens, Reflection lens |
| Dimension OF this machine | 95*63*49cm, and weight (included the plywood) is 50kgs. |
