I.Introduction of 3 in 1 straightener feeder with uncoiler
A automation equipment in high speed feeding coil for punch press. The machine is feeding levelling with uncoiling steel coil. The 3 in 1 whole line is controlled by PLC with computer display. We mainly apply computer-control system of brands Mitsubishi. This line can help to improve efficiency, lower cost and ensure quality. TNCF series has won wide market with its high performance and low price. The thickness of material can be from 0.2MM to 8MM, width from 150MM to 1600MM, highest precision ±0.15MM and speed 16M/min. This machine is applicable for processing of copper coil, aluminum coil, cold-rolled coil, hot rolled material, silicon steel, and stainless steel and so on.
II. standard type
| Ltem / Model | TNCF7-600 | TNCF7-700 | TNCF7-800 | TNCF7-1000 | TNCF7-1300 | TNCF7-1600 |
| Width of Material(mm) | 75-600 | 75-700 | 75-800 | 75-1000 | 75-1300 | 75-1600 |
| Thickness of Material(mm) | 1.0-10.0 |
| Max.coil Weight(kg) | 3T ight can be customized | 5T Weight can be customized | 8T
weight can be customized |
| Coil L.D.(mm) | 508 |
| Max.Coil O.D.(mm) | 1500 |
| Max.Speed(m/min) | 16 |
| Feed Pitch Accuracy(mm) | ±0.15 |
| Feed ROLL | Upper1 / Lower1 |
| Straighten ROLL | ¸ŠUpper4 / ¸Lower3 |
| Voltage | 380VAc / 60Hz |
| Air power supply | 5kg / CM² |
| Uncoiler Expansion | Hydraulic |
| Servo Motor(kw) | AC5.5KW
with servo reducer | AC7.5KW
with servo reducer | AC11KW
with servo reducer |
| Uncoiler Motor(kw) | 3.7 KW | 5.5KW | 7.5KW |
| Coil Car | 1 optional | standard |
| Pass line | ±100 MM |
III.Straightener adjustment
| Model/Width/Thickness | 1.0 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 8.0 | 10.0 |
| TNCF7-600 | 600 | 450 | 350 | 200 |
| TNCF7-700 | 700 | 600 | 450 | 350 | 200 |
| TNCF7-800 | 800 | 800 | 600 | 450 | 350 | 200 |
| TNCF7-1000 | 1000 | 800 | 600 | 450 | 350 | 200 |
| TNCF7-1300 | 1300 | 1000 | 800 | 600 | 450 | 350 | 200 |
| TNCF7-1600 | 1600 | 1300 | 1000 | 800 | 600 | 450 | 350 | 200 |
