18MHz FM Radio Band Expander Frequency Shifter Converter For Toyota
- FOB Price: 3 ~ 5 ( Negotiable )
- Minimum Order Quantity: 100 Piece
- Delivery Time: 3 to 5 Days Day
- Supplying Ability: 10000 Piece / Month
- Payment Type: T/T, Western Union, Money Gram, PayPal
Product Description
Car Radio FM Band Frequency
(10Mhz, 12Mhz, 16Mhz, 18Mhz, 20Mhz optional)
10Mhz | Receiving 88Mhz to 108Mhz |
12Mhz | Receiving 88Mhz to 108Mhz |
14Mhz | Receiving 90Mhz to 108Mhz |
16Mhz | Receiving 92Mhz to 106Mhz |
18Mhz | Receiving 94Mhz to 108Mhz |
Technical Details:
Voltage: | 12 Volts |
Current: | DC 0.005 Amps |
Loss of AM Signal | None |
Shift the Japanese version in line with the wave band universal Japanese car
The radio band expander enables the orignal equipped radio in Japanese imported cars to receive radio transmissions in other countries.
Electronic circuit with both active and passive connections.
It achieves this by shifting the transmission frequencies into the band that the Japanese radio will detect.
It attaches in-line with the antenna input on the stereo and will receive all stations from 88Mhz to 108Mhz, different from Japan radio frequency from 76Mhz to 90Mhz.
The supply for 12V DC (+) voltage to the red wire, negative to the black wire
1. Remove radio from dash or obtain clear view of antenna input socket to radio.
2. Disconnect the antenna lead from the back of your car radio.
3. Plug the antenna lead into the female socket on the FM Band Expander.
4. Plug the male plug from the FM Band Expander into the antenna socket on the radio.
5. Connect the red power lead from the FM Band Expander to +12 volt power supply on
your car using the black quick tap connector supplied. Preferably use the
accessory feed that supplies the radio. This will ensure power is supplied while
radio is in operation. NB. Your FM Band Expander is earthed via your existing antenna. Please ensure the unit is clear of any moving pedals, heater controls etc. If your vehicle is fitted with a Diversity antenna system connect the Band Expander to the main aerial and disconnect the sub - aerial, but we recommend fitting a Band Expander on each aerial input.
1. Is it important to run Band Expander on 12 Volts?
Band Expander is designed to run on 12 Volts. There are available 24 Volts Band Expanders, also most 24 Volts vehicles have a 24 Volt to 12 Volt converter to run the stereo system.
2. What are Radio Station Double-Ups?
Common to all FM Band Expanders are Radio Station Double-Ups caused by shifting 20Mhz of bandwidth into 14Mhz of bandwidth ( 88Mhz to108Mhz shifted into 76Mhz to 90MHz ) and overlapping Japanese band FM Band and International FM Band ( 88Mhz to 90Mhz ) eg: Radio Station 105.4Mhz and 95.4Mhz will both tune into the car radio at 85.4Mhz.
3. What are Radio Frequency Blank Spots?
Common to all Band Expanders frequency harmonics generated by Crystal oscillator. Operating well below receiving frequencies producing blank-spots on frequency tuning range. For 10Mhz frequency shift Blank Spots are 90 and 100Mhz for 12Mhz shift they are 96 and 108Mhz for14Mhz shift 98Mhz for 16Mhz shift 96Mhz and 18Mhz shift is 90 and108Mhz.
4. Does the Band Expander change the Car Radio Display
No the Band Expander does not change the radios display, it only changes the original frequency once tuned, program into pre-select memory.
5. Are FM Band Expanders all the same ?
No they are not all the same. They may work but there can be or a number of unsatisfactory performance problems. E.G. radio interference, weak signal, inadequate bandwith.
6. Is Radio filter important?
It is essential requirement in rejecting unwanted frequencies interfering with the shifted FM Band. Unfortunately most countries frequency range is fully utilized, resulting in large numbers of Communication Equipment operating above and below FM Band. Compromising filter's performance will result in more interference occurring.
7. Can I change the car radio set internally to new FM Band ?
Yes there is a small number of sets that can be changed, they require changing the microcontroler's software and or replacing tuner pack.
Contact Information
- Contact Person: Mr. Mark Wei (Marketing Manager/Director)
- Company: RINSON INDUSTRIAL CO., LTD.
- Address: Tong He, Guangzhou, Guangdong, China
- Zip/Postal: 510620
- Telephone: 86-2037380507
- Fax: 86-2037380606
- Mobile: 86-13570342171
Company Profile
- RINSON INDUSTRIAL CO., LTD.
- [ China ]
-
Established in 2005 , our company is one professional manufacturer and supplier in combination of development , production , and sale , in which mainly in auto electronics. We have our own high-class equipment , and strong technology capacity . we have owned advance equipment such as SMT, ICT , and any other test system , which put forwards the industrial design, circuit design., production-wit...
Basic Information
- Business Type: Manufacturing
- Company Products / Services: fm band expander, car radio turner, car audio, gps tracker, car light
- Year Established: 2000
- Number of Employees: 1000-2000
- Website: http://www.expander-modulator.com