Product Description

• ZR-80WE CO2 POWER SUPPLIES
  Feature
  1. This high voltage laser power suppliess control interface is applicable to high/low level signal. TTL level is to control the on/off of the laser power with a protective switch to check water-flow and ventilation.
  2. Each 80Watt laser power supplies before selling will go through the aging check:
  (1) sustain 10 hours at temperature 60 Degrees Celsius under full-load condition;
  (2) 500 times on/off check for 7 seconds.
  3. Input analog signal(0~5V) or PWM is used to control the output laser power on this 80Watt laser power supplies.
  4. This 80Watt laser power supplies is used to drive most brands 1200-1450mm CO2 laser tube. The two fans laser power supplies use zero-current half-bridge soft-switch circuit to make sure the CO2 laser power supplies have high efficiency and fast response speed.
  5.This two fans laser power supplies has RED TEST button to easily figure out CO2 power supplies or CO2 laser tubes failure. It is very easy and simple to remove trouble.
  6. Aging check before stored in warehouse:
  7. The CO2 laser power supplies have H/L/P/G/IN/5V control signal interface，The upper cover and bottom shell are made of aluminum Casing is galvanized sheet.
  Specification

  lnput	Input voltage	AC220V±10% (AC110V specified while order)
  AC frequency	47~440HZ
  Maximum input power	750W
  Maximum input current	3.4A
  Output	Maximum output voltage	32KV
  Maximum output current	33mA (depending on the laser tubes of different manufacturers)
  Efficiency	More than 90% (Full load)
  Response speed	Not more than 1ms
  Control lnterace	TTL multilevel switching control, effective level can be high and low selection (see control wining diagram)
  Insulation	lnput-output	AC 1500V 1 minutes not more than 10mA
  lnput-shell	AC 1500V 1 minutes not more than10mA
  Output-shell	Connection
  Open Circuit Protection	Can be short circuit (requires a good grounding shell, while avoiding the positive electrode and the shell between the arc)
  Environmental Requested	Working temperature	-10℃~50℃
  Storage of temperature	-20℃~75℃
  Relative Humidity	Maximum 85%RH (non-condensing)
  Altitude	100, 000 feet of work 200, 000 feet of storage, dose not work
  Cooling methods	Forced air cooling (fan cooling)
  Dimensions (LxWxH)	283mmx178mmx106mm

   

Company Profile

• Jinan Ruby Laser Technology Co., Ltd
• [ China ]
• This company is registered as a free member and is not verified or authenticated by Tradekey.com
• Jinan Ruby Laser Technology Co.,Ltd is main laser power supply manufacturer which was established at 2007. From then on ,she has more than 17 years experience to research & develop, produce and sell ZRSUNS brand CO2 laser power supply andother laser cutting or engraving machine accessories. At present, our CO2 power supply has three series products(ZR series,BR series and DY series).ZR/BR serie...
  

Basic Information

• Company Products / Services: co2 laser power supply, co2 laser tube, power supply for co2 laser tube, co2 laser power souce, laser engraving power supply, laser cutting power supply
• Year Established: 2015
• Number of Employees: 26-50
• Website: http://www.rlaserpowersupply.com