Tele Remote Control System Lhd

Tele Remote Control System Lhd
Alpha Industrial Technology Pty Ltd

Product Description

  • Brand Name: Alpha
  • Radio Remote Control  System LHD 

    Radio Remote Control LHD Loader can be operated either within line of sight or out of sight. In the line of sight remote control mode, the operator carries a portable remote control unit, within 100m range from the mine, using the eyes to observe the surrounding conditions, remote control operation LHD loader, to achieve safe and efficient mining process.

     
    Performance characteristics

    1. Industrial grade 3.2-inch OLED, real-time display remote control and receiver working status, to provide fault reasons and maintenance guidance.
    2. Ultra-low power design, when the battery is full, can be used continuously for 24 hours.
    3.Transmission stability, the use of FEC forward error correction algorithm, proactive corrective disturbed packets,  strong anti-jamming ability,  and communication distance is greater than 1km.
    4. IP67 level protection, suitable for harsh environmental conditions and extreme operating temperatures (-40 degrees C... +85 C), damp proof, shock proof, suitable for industrial environment.
    5.The controller uses 72MHz ultra-modern 32 bit technology, real-time operating system, high electromagnetic compatibility (EMC), input / output band fault detection function, pulse width modulation (PWM) electromagnet current closed loop control.
    6. Open CAN bus, RS485 and other intelligent control interface, so that it and other bus devices or electronic system (For example, RC, the handle, the display, the engine) exchange data.
    7. Hydraulic system, the use of the United States SUN high precision proportional solenoid valve.
    8. Engine temperature, oil pressure, brake pressure and other alarm instructions.
    9. Emergency brake immediately stop, stable and reliable.
    10. Start the braking interlock, parking brake can be allowed to start, to avoid accidents.
    11. The function of self-imposed brakes,  handle in the middle position,  the brake automatically imposed.
    12. Throttle control amplitude adjustable, all models linear proportional control.
    13. Output control uses the advanced multi point calibration method, pure linear control.
    14.7.7 inch /9 inch HD display, dual / four screen display at the same time, the display can be adjusted at any angle.
    15.Two / four infrared waterproof wireless camera, IP69K waterproof, auto focus, 130 degree wide viewing angle, 850 type infrared night vision function.
     
    Remote control transmitter
     
    Remote control transmitter, which can collect real-time switch and handle state, through the radio network to transmit information to the car radio receiver. This product has real-time, strong, light weight, small size, compact structure, simple wiring, low power consumption, easy to install and use and other advantages. The system has a high-performance 32-bit microprocessor and all input and output circuits. Equipped with industrial grade 3.2-inch OLED, real-time display remote control, receiver working status, can monitor the engine speed, water temperature, water level, oil temperature, fuel tank level, centralized lubrication system alarm, hydraulic lift system alarm, hydraulic brake System reported, hydraulic steering system alarm.

     Technical Parameters:

    Operating Voltage DC12V
    Working current < 50mA
    Signal transmission rate 1Mbps
    Communication distance >1000m
    Interface configuration 32 digital inputs, 12 analog inputs, 1 CAN, 1 RS485
    Temperature range -40ºC...+85ºC
    Certification CE, MA, KA
    Shell Industrial anti - static fire - retardant chassis
    Size 350×220×170mm
    Weight 4.5kg
     
     Vehicular radio receiver


     Vehicular radio receiver applied to complicated walking operation machinery. With ultra-modern 32-bit triple-core technology and 72MHz clock frequency and parallel processing capabilities, the controller in the performance of a new upgrade. The application field extends from the programmable control of the proportional electromagnet and the extra switching function to the coordination of the travel drive and drive control, as well as the walking machine high complexity control circuit. Up to 32 outputs (0% * Vbat to 100% * Vbat), 4 analog inputs, 8 digital inputs, and 1 CAN bus for intelligent communication. These control units provide a high-performance platform for all functions of walking machinery.
    The receiver has a high-performance 32-bit microprocessor and all input and output circuits. Analog voltage range from 0 to 24V, current from 0 to 20mA, frequency from 0 to 10kHz, switching information as an input signal processing. In addition, the inputs are protected against overvoltages and electrical disturbances. The voltage input can be monitored to detect cable breakage or short circuit. The current-controlled proportional solenoid output is pulse-width modulated (PWM) and compensates for temperature and voltage fluctuations to ensure high accuracy and minimum hysteresis. The switch output is designed for direct disconnecting of the relay and switching electromagnets. In addition, the output also has integrated voltage and current monitoring.
     
    Technical Parameters
    Operating Voltage DC24V
    Working current < 50mA(Without load, the operating current depends on the load)
    Signal transmission rate 1Mbps
    Communication distance >1000m
    Interface configuration 32 outputs (analog / digital), 5 DI, 4 AI, 1 CAN, 1 RS485
    Temperature range -40ºC...+85ºC
    Certification CE, MA, KA
    Shell Industrial anti - static fire - retardant chassis
    Size 220×120×91mm
    Weight 2.5kg
     
    Electrical unit
     
    Manual / remote control switching module. The engine start / keep, front / rear lights, forward, back, brake / auxiliary brakes, speakers, fire, fast / slow block, trailer control drive circuit module. Left / right turn, up / down arm, loading / unloading, throttle control PWM signal driver circuit module.  The brake status, neutral state, pressure alarm, temperature alarm, other alarm detection of digital signal conversion circuit module. Oil pressure, engine temperature, double oil pressure, brake oil pressure, fuel oil level, fuel fuel consumption monitoring analog signal conversion circuit module.

     
    Vehicular Solenoid Valve

    The hydraulic unit is the key execution part of the remote control vehicle unit to drive and control the hydraulic system of the scraper. It is the actuator of the electric control signal to the hydraulic action. Specific function parameters are as follows:
            1, Switch control solenoid valve: forward, back, brakes, auxiliary brakes, speed block;
            2, The proportion of control solenoid valve: turn left, turn right, down arm, boom, loading, unloading, throttle;
            3, The supply voltage: DC24V;
            4, The working current: 800mA;
            5, Interface type: AMP or Horshmann interface, with LED indicator;

    Remote operation is exactly the same as manual operation
    Specific operation:
    1.9-way PWM signal: forward, backward, left, right, down arm, boom, loading, unloading and throttle control;
    2.11-way digital output signals: engine hold, engine start, headlight control, rear light control, forward control, backward control, brake control, auxiliary brake control, fire control, speed block control and speaker control;
    3.4-way digital input signals: remote manual switch, brake detection, neutral detection and alarm detection.

Company Profile

  • Alpha Industrial Technology Pty Ltd
  • [ China ]
  • This company is registered as a free member and is not verified or authenticated by Tradekey.com
  • Alpha Industrial Technology Pty Ltd, dedicates to provide intelligence mining solutions, based on IoT (Internet of Things), for Mining & Mineral projects.    Mining Equipment Remote Control system, such as Load-Haul-Dump radio remote control, Drilling remote control, etc. Including line-of-sight remote control, intelligence glove (Gesture control), Tele-remote control system;  α Brainwav...

Basic Information

  • Company Products / Services: mining remote control system, equipment
  • Year Established: 2011
  • Number of Employees: 16-25
  • Website: www.alpha-technology.com.au
Contact Now