| Sensing Type | Diffuse |
| Sensing Object | Min Dia 60mm opaque object |
| Sensing Distance | 100mm*1 | 400mm*1 |
| No-load Current | Max.40mA |
| Supply Voltage | 10-30VDC |
| Response Time | Max.5ms |
| Light Source | Infrared LED（modulated） |
| Action Mode | According to product model to select Light On or Dark On |
| Control Output | NPN open collector，
Load voltage：Max.30V DC,
Load current：Max.150mA,
Voltage Drop：Max.0.7V DC |
PNP open collector，
Output voltage：supply voltage-0.7V,
Load current：Max.150mA |
| Circuit Protection | Reverse polarity protection, short circuit protection, over voltage protection |
| Indication Light | Power indicator：Green Action indicator：Red |
| Attended Mode | Output Cable |
| Insulation Resistance | Min.20MΩ(at 500VDC) |
| Anti-interference | ±240V simulative square wave interference (pulse witch：1μS) |
| Insulation & Voltage-resistance | ±4000V 1.2/50us impact 5 times |
| Impact Resistance | Housing：1000m/s2 about 100G impact 3 times；
Lens：300m/s2 about 30G impact 3 times（measured in the case of power off） |
| Vibration Resistance | 10~50Hzz（Cycle: 1min）
Each 1 hour at X、Y、Z direction（measured in the case of power off） |
| Ambient Brightness | Sunlight：Max.11000lx；Fluorescent：Max.3000lx |
| Ambient Temperature | -20~﹢60℃（Non-freezing），
Storage：-25~﹢70℃ |
| Ambient Humidity | 35~90%RH，Storage：35~90%RH |
| Material | Housing：Cr plated Cu，Lens：PMMA |
| Accessory | Nut |
| Cable Standard | Emitter：Φ5.2×0.3mm，
Receiver：Φ5.3×0.2mm，Wire length：2m*3 |
| Protection Rating | China Standard：GB/T14048.10-2008;
Or: IEC 60947-5-2：2004 |
| | IP67(IEC) |
