LS225+N1500 is a split type plating thickness tester, which consists of the host and the non-ferrous probe N1500. The digital plating thickness tester adopts the eddy current induction principle. It has ultra-high measurement accuracy and repeatability. LS225+N1500 plating thickness measuring instrument is equipped with a probe, which is especially suitable for measuring ultra-thin coatings and various small-sized work pieces and special-shaped materials.
LS225+N1500 best plating thickness gauge is mainly used to measure the thickness of the anodized layer on the surface of aluminum alloy profiles, aluminum plates, aluminum-plastic panels and various aluminum work pieces, as well as non-conductive coatings on non-ferrous metal substrates such as brass and copper.
LS225 Plating thickness tester parameters
| Display |
240×160 dot matrix LCD |
| Power supply |
4pcs of 1.5V AAA alkaline battery |
| Operation temperaturerange |
0℃-50℃ |
| Storage temperaturerange |
-20℃-60℃ |
| Host size |
148*76*26 mm (L*W*H) |
| Weight (include battery) |
194g |
2. N1500 probe parameters
| Measuring principle |
Eddy current |
| Substrate |
Ferromagnetic metal |
| Measuring range |
0.0-1500μm |
| Resolution |
0.1μm:(0μm - 99.9μm)
1μm:(100μm - 999μm)
0.01mm:(1.00mm 1.50mm) |
| Repeatability |
≤ ± (0.8% of reading + 0.1μm) Test with fixture |
| Accuracy |
≤±(2%reading+0.3μm) after 5 points calibration |
| Unit |
μm / mil |
| Measuring interval |
0.8s |
| Minimum measuring area |
= 7mm |
| Minimum curvature |
Convex:1.5mm / Concave:10mm |
| Minimum substrate thickness |
0.05mm |
| Calibration |
Support zero reference adjustment and 1 to 5-points calibration |
| Probe size |
110*15 mm (Without connecting cable) |
| Probe weight |
81g |
