Main technical specifications and performance indicators
1. Model 500 feed unit
Size: 170*130*315cm
Installed capacity: Crushing B35.2 grade:7.5 kW; mixer ordinary 4 grade: 2.2 kW
Bearing: 1 set 7208; 1 set UCF208; 4 sets 205
Oil seal: 2 sets 50*72*12, 4 sets 25*52*10
Triangle belt: 2 pieces A1500, 2 pieces A650
2. Model 1000 feed unit:
Size: 210*150*360cm
Installed Capacity: Crushing B35.2 grade: 7.5KW; mixer ordinary 4 grade: 2.2KW
Bearing: 1 set 7208; 1 set UCF208; 2 sets 205
Oil seal: 2 sets 50*72*12; 4 sets 25*52*10
Triangle belt: 2 pieces A1700; 2 pieces A650
3. Mixer type: vertical
4. Suction device form: double simple suction nozzle
5. Production: 500-1000kg/h
6. Power consumption: 4-9KW/h per ton
7. Finished material type: powdery dry material
8. Operators: 1-2 people
9. Mixing uniformity: coefficient of variation ≤13%
Main structure and Process flow
1. Structure: the unit consists of four groups of hammer mills, vertical mixers, iron removal devices-double cylinder nozzles, bag dust removal devices, etc. (as shown below)
2. Process flow
Device installation
1. First choose the appropriate place to stabilize the machine and dig the pit
2. Install the motor of the mixer
3. Install the suction tube, and place the return air tube on the suction tube. The lower side of the return air tube is 1 cm lower than the suction tube. If the bottom of the crusher is less 4 mm , the bottom of the return duct should be 3 cm smaller than the bottom of the pit.
4. Install a dust bag and fasten the bag
