Plastic-sprayed aluminum alloy accessories
Product description:
1. Install PU Sandwich wall panel/Metal carved board/Metal siding wall panel.
2. Beautiful, easy to install, durable material, seamless, no rust.
3. Color no change, strong strength, lightweight.
4. Plastic sprayed aluminum alloy material.
Installation:
Step 1: Preparation
When the metal carving board and its accessories are ordered to the site, you need to prepare the installation of the plate and accessories tools, mainly expansion screws, dovetail nails, pistol drill, gas nail gun, marker, tape measure, rubber hammer, and cutting machine.
Step 2: Install the accessory base
Before installing a metal carved plate, the base of plate accessories should be installed first. There will be starting parts, closing parts, edges, seams, and internal and external corners.
Step 3: Install the plate
After installing the base of the accessories, then install the first piece of metal carving board horizontally from top to bottom, and all the plates must be female mouth down male mouth up. After the first piece of plate is installed with a screw or nail dovetail should be fixed on the wall (suggest every 60 cm distance is fixed a nail), then the mother of the second board mouth to aim at the first board of the mouth and down tight, at the same time with a rubber hammer of tapping two boards interface to ensure that the joint of two boards enough heads, The second board can then be fixed to the wall with expansion screws or dovetail nails, and the other boards can be installed in the same way.
Step 4: Install the fitting cover
After all, the metal carved plates are installed, press the cover plate of the fitting firmly on the base. If it is the same material accessories, you can use screws fixed on the wall, and finally sealed with waterproof glass glue.
