WS-C2960-24PC-L Switch 24 10/100 PoE + 2 T/SFP LAN Base Image Catalyst 2960 Series Switches
50%-98% off WS-C2960-24PC-L price, buy new & refurbished C2960-24PC PoE switch: Cisco Catalyst 2960 24 10/100 PoE + 2 T/SFP LAN Base Image
1.100% new SEALED NIB
2.1 year warranty
3. Save up 20%-60% off the GPL
4. Fully tested and Guaranteed
WS-C2960-24PC-L Overview
Layer 2 access switch
Software: LAN Base
Total 24 PoE Ethernet 10/100 ports
2 GE dual purpose uplink
PoE switch, total available PoE power: 370W
Support maximum 24 ports up to 15.4W
Support redundant power supply (RPS)
Support ACL, Auto QoS, DHCP Snooping, Link STate Tracking, and IPv6 Host
Not support FlexStack
Not support PoE+
If optical ports to be used, additional GE SFP module will be required
Forwarding bandwidth: 16Gbps
Switching bandwidth: 32Gbps
The Cisco Catalyst 2960 Series Switches are the leading Layer 2 edge, providing improved ease of use, highly secure business operations, improved sustainability, and a borderless network experience. 2960 Series are fixed-configuration access switches designed for enterprise, midmarket, and branch office networks to provide lower total cost of ownership.
Catalyst 2960-24PC-L Switch Front Panel and Rear Panel
WS-C2960-24PC-L Specification and Datasheet
Model
Brand Cisco
Series Catalyst 2960
Product ID: WS-C2960-24PC-L
WS-C2960-24PC-L Configurations
Ethernet ports 24 Ethernet 10/100 PoE ports
Uplink Interfaces 2 dual-purpose ports (10/100/1000 or SFP)
Cisco IOS Software Feature Set LAN Base
Available PoE Power 370W
Maximum Number of PoE+ (IEEE 802.3at) Ports N/A
Maximum Number of PoE (IEEE 802.3af) Ports 24 ports up to 15.4W
Performance and Scalability
Forwarding bandwidth 16 Gbps
Switching bandwidth 32Gbps
Flash memory 32 MB
Memory DRAM 64 MB
Max VLANs 255
VLAN Ids 4000
Maximum transmission unit (MTU) Up to 9000 bytes
Forwarding Performance
Forwarding Rate 6.5 mpps, 64-Byte Packet Cisco Catalyst 2960
Resource
Unicast MAC addresses Default:8000; QoS:8000; Dual:8000
IPv4 IGMP groups Default:255; QoS:255; Dual:255
IPv4 MAC QoS access control entries (ACEs) Default:128; QoS:384; Dual:0
IPv4 MAC security ACEs Default:384; QoS:128; Dual:256
Dimensions (H x W x D)
Inches 1.73 x 17.7 x 13
Centimeters 4.4 x 45 x 33.2
Weight
Pounds 12
Kilograms 5.4
Environmental Ranges
Operating temperature up to 5000 ft (1500 m) Fahrenheit: 23º to 113ºF; Centigrade: -5º to 45ºC
Operating temperature up to 10, 000 ft (3000 m) Fahrenheit: 23º to 104ºF; Centigrade: -5º to 40ºC
Short-term exception at sea level Fahrenheit: 23º to 31ºF; Centigrade: -5º to 55ºC
Short-term exception up to 5000 feet (1500 m) Fahrenheit: 23º to 122ºF; Centigrade: -5º to 50ºC
Short-term exception up to 10, 000 feet (3000 m) Fahrenheit: 23º to 113ºF; Centigrade: -5º to 45ºC
Short-term exception up to 13, 000 feet (4000 m) Fahrenheit: 23º to 104ºF; Centigrade: -5º to 40ºC
Storage temperature up to 15, 000 feet (4573 m) Fahrenheit: 23º to 158ºF; Centigrade: -25º to 70ºC
Operating altitude Feet: Up to 10, 000; Meters: Up to 3, 000
Storage altitude Feet: Up to 13, 000; Meters: Up to 4, 000
Operating relative humidity 10% to 95% noncondensing
Storage relative humidity 10% to 95% noncondensing
Predicted Reliability
MTBF in hours 311, 781
Connectors and Interfaces
Ethernet Interfaces 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 UTP cabling
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-SX -LX/LH, -ZX, -BX, -T, -FX, and CWDM SFP-based ports: LC fiber connectors (single/multimodefiber)
100BASE-LX, -BX, -FX SFP-based ports: LC fiber connectors (single/multimodefiber)
Power Customers can provide power to a switch by using the internal power supply. Theconnector is located at the back of the switch. These switches do not have a redundant-power-supply port
The internal power supply is an auto-ranging unit
The internal power supply supports input voltages between 100 and 240 VAC
Use the supplied AC power cord to connect the AC power connector to an AC power outlet
Cisco RPS connector:
The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch
The connector offers a 2300W redundant power system that supports up to 6 external network devices and provides power to2 failed devices at a time
The connector automatically senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of network traffic
Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle
SFP Interfaces GLC-SX-MMD GLC-LH-SMD
GLC-T (1000BASE-T) GLC-SX-MM
GLC-LH-SM GLC-ZX-SM
GLC-ZX-SMD GLC-BX-D
GLC-BX-U CWDM SFP
Voltage and Power Ratings
AC/DC input voltage 100 to 240 VAC
AC/DC Input current 8.0 to 4.0 A
Frequency 50 to 60Hz
Power Rating (kVA) 0.47
DC Input Voltages (RPS Input) 12 V at 11.25 A; -48 V at 7.8 A
Management and Standards Support
Management BRIDGE-MIB CISCO-CABLE-DIAG-MIB
CISCO-CDP-MIB CISCO-CLUSTER-MIB
CISCO-CONFIG-COPY-MIB
CISCO-CONFIG-MAN-MIB
CISCO-DHCP-SNOOPING-MIB
CISCO-ENTITY-VENDORTYPE-OID-MIB
CISCO-ENVMON-MIB CISCO-ERR-DISABLE-MIB
CISCO-FLASH-MIB CISCO-FTP-CLIENT-MIB
CISCO-IGMP-FILTER-MIB CISCO-IMAGE-MIB
CISCO-IP-STAT-MIB CISCO-LAG-MIB
CISCO-MAC-NOTIFICATION-MIB
CISCO-MEMORY-POOL-MIB
CISCO-PAGP-MIB CISCO-PING-MIB
CISCO-POE-EXTENSIONS-MIB
CISCO-PORT-QOS-MIB
CISCO-PORT-SECURITY-MIB
CISCO-PORT-STORM-CONTROL-MIB
CISCO-PRODUCTS-MIB
CISCO-PROCESS-MIB
CISCO-RTTMON-MIB CISCO-SMI-MIB
CISCO-STP-EXTENSIONS-MIB
CISCO-SYSLOG-MIB CISCO-TC-MIB
CICSO-TCP-MIB CISCO-UDLDP-MIB
CISCO-VLAN-IFTABLE RELATIONSHIP-MIB
CISCO-VLAN-MEMBERSHIP-MIB
CISCO-VTP-MIB ENTITY-MIB
ETHERLIKE-MIB IEEE8021-PAE-MIB
IEEE8023-LAG-MIB IF-MIB
INET-ADDRESS-MIB
OLD-CISCO-CHASSIS-MIB
OLD-CISCO-FLASH-MIB
OLD-CISCO-INTERFACES-MIB
OLD-CISCO-IP-MIB OLD-CISCO-SYS-MIB
OLD-CISCO-TCP-MIB OLD-CISCO-TS-MIB
RFC1213-MIB RMON-MIB
RMON2-MIB SNMP-FRAMEWORK-MIB
SNMP-MPD-MIB SNMP-NOTIFICATION-MIB
SNMP-TARGET-MIB SNMPv2-MIB
TCP-MIB UDP-MIB
ePM MIB
Standards IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p CoS Prioritization
IEEE 802.1Q VLAN
IEEE 802.1s
IEEE 802.1w
IEEE 802.1X
IEEE 802.1ab (LLDP)
IEEE 802.3ad
IEEE 802.3af
IEEE 802.3ah (100BASE-X single/multimode fiber only)
IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
IEEE 802.3 10BASE-T specification
IEEE 802.3u 100BASE-TX specification
IEEE 802.3ab 1000BASE-T specification
IEEE 802.3z 1000BASE-X specification
100BASE-BX (SFP)
100BASE-FX (SFP)
100BASE-LX (SFP)
1000BASE-BX (SFP)
1000BASE-SX (SFP)
1000BASE-LX/LH (SFP)
1000BASE-ZX (SFP)
1000BASE-CWDM SFP 1470 nm
1000BASE-CWDM SFP 1490 nm
1000BASE-CWDM SFP 1510 nm
1000BASE-CWDM SFP 1530 nm
1000BASE-CWDM SFP 1550 nm
1000BASE-CWDM SFP 1570 nm
1000BASE-CWDM SFP 1590 nm
1000BASE-CWDM SFP 1610 nm
10GBASE-LR (SFP+)
10GBASE-SR (SFP+)
10GBASE-LRM (SFP+)
10GBASE-CX1 (SFP+)
RMON I and II standards
SNMP v1, v2c, and v3
RFC compliance RFC 768 - UDP
RFC 783 - TFTP
RFC 791 - IP
RFC 792 - ICMP
RFC 793 - TCP
RFC 826 - ARP
RFC 854 - Telnet
RFC 951 - Bootstrap Protocol (BOOTP)
RFC 959 - FTP
RFC 1112 - IP Multicast and IGMP
RFC 1157 - SNMP v1
RFC 1166 - IP Addresses
RFC 1256 - Internet Control Message Protocol (ICMP) Router Discovery
RFC 1305 - NTP
RFC 1492 - TACACS+
RFC 1493 - Bridge MIB
RFC 1542 - BOOTP extensions
RFC 1643 - Ethernet Interface MIB
RFC 1757 - RMON
RFC 1901 - SNMP v2C
RFC 1902-1907 - SNMP v2
RFC 1981 - Maximum Transmission Unit (MTU) Path Discovery IPv6
RFC 2131 - DHCP
RFC 2138 - RADIUS
RFC 2233 - IF MIB v3
RFC 2373 - IPv6 Aggregatable Addrs
RFC 2460 - IPv6
RFC 2461 - IPv6 Neighbor Discovery
RFC 2462 - IPv6 Autoconfiguration
RFC 2463 - ICMP IPv6
RFC 2474 - Differentiated Services (DiffServ) Precedence
RFC 2597 - Assured Forwarding
RFC 2598 - Expedited Forwarding
RFC 2571 - SNMP Management
RFC 3046 - DHCP Relay Agent Information Option
RFC 3376 - IGMP v3
RFC 3580 - 802.1X RADIUS
Related Cisco 2960 series network switches
WS-C2960-24TC-L WS-C2960S-48LPD-L
WS-C2960-48TC-L WS-C2960S-48FPD-L
WS-C2960-24PC-L WS-C2960X-24PS-L
WS-C2960-24PC-S WS-C2960X-48LPS-L
WS-C2960-24TT-L WS-C2960X-24TS-L
WS-C2960-48TT-L WS-C2960X-48TS-L
WS-C2960S-24TS-L WS-C2960X-48FPD-L
Delivery
We ship Cisco networking products to worldwide. Normally cargo will be shipped within 2 business days after payment arrived. Tracking Number will be offered once delivery done.
Delivery Options Estimated Delivery Time
DHL 2-4 business days
Fedex 2-4 business days
HongKong EMS 5-10 business days
HongKong Air Parcel 10-20 business days
By sea 10-20 business days
