PRODUCT DESCRIPTION
SBOND RTV Silicone Gasket Maker is a single component, room temperature vulcanizing
(RTV) gasketing compound, designed for the sealing of mechanical assemblies.
Upon curing from the exposure to moisture in the air, this non-sagging paste forms a tough, flexible, waterproof seal of silicone rubber, which resists aging, weathering and thermal cycling without hardening, shrinking or cracking.
PRODUCT BENEFITS
Easy application
Applied to horizontal or vertical surfaces
Superior adhesion and flexibility
Waterproofs
Insulates
Unaffected by vibration
Non-flammable
DIRECTIONS FOR USE
For Assembly
1. Remove all previous material from mating surfaces. SBOND Gasket Remover is recommended for most materials, not for plastics or painted surfaces.
2. For best results, clean and dry all surfaces with a residue-free solvent, such as SBOND Brake and Parts Cleaner.
3. Cut nozzle to desired bead size, 1/16 to 1/4 in diameter. An 1/8 bead is usually sufficient for most applications.
4. Remove cap, puncture tube or cartridge seal and attach extension nozzle.
5. Apply a continuous and even bead of silicone to one surface, as shown below:
6. Assemble parts immediately while silicone is still wet. Secure or tighten as required, avoiding excessive squeeze-out.
7. Re-torque will not be necessary after the product has cured.
