Product Description
CXYF Series external oil separator for screw compressor is special designed for the screw compressor without oil separator, especially for the parallel screw compressor unit, it can uarantee there will be enough lubricant supplied to each compressor for making all the compressors run safely. Because of the exellent design of this CXYF Sries external oil separator, it will allow the least lubricant enter into the system, so the heat exchange ratio of the system will be increased.
There is an oil-stored area at the bottom of the oil separator, and there are 2 sight glasses. The upper one is a transfinite oil level sight glass, when the oil level is higher than this height, the oil will be taken into the system together with the refrigerants. The under one is a standard oil level sight glass, the normal oil level shall be at the position of 1/2 sight glass.
The oil heater of the oil separator shall be power up to work when the compressor stops running, and it shall stop working when compressor starts to run. The lowest temperature of the oil temperature controller shall be set with +40℃, if you used the oil separator in the low-temperature environment, do please performe the insulation treatment to it.
The operation instruction to the photoelectric type oil level monitoring please check n the next page.
Applicative refrierants: R134a, R404A, R407A, R407C, R507, R22.
