I.Straightening feature.
1.1.upper roller adjustment by digital watch .
2.Coil width adjusted by double handle wheel with precise screw rod
3.Pass line can be adjusted by the lifter driven by motor .
4. uncoiler with four "A" steel backgauges .
5.Pinch roll and straightener roll material:high-strength alloy bearing steel with hard chrome plating.
6.Pneumatic coil arm device.
7.pneumatic peeler table.
8.Mitsubishi PLC control feeding program from Japan .
9.Feed accuracy controlled by Japan YASKAWA servo motor with precise planetary reducer .
II. Introduction of press feed line
Servo driven feeds share many of the advantages with the press driven variety, such as minimal space requirement, low maintenance, and high speeds. However, servo feeds also provide benefits that press driven units cannot. The fact that they utilize a microprocessor based control gives them an added dimension. Features such as programmable move patterns, self diagnostics, auto correction, and the ability to communicate with automation - just to name a few - set them apart from other types of feeds.
III.Specification:
| Ltem / Model | TNCF4-300 | TNCF4-400 | TNCF4-500 | TNCF4-600 | TNCF4-700 | TNCF4-800 | TNCF4-1000 | TNCF4-1300 |
| Width of Material(mm) | 75-300 | 75-400 | 75-500 | 75-600 | 75-700 | 75-800 | 75-1000 | 75-1300 |
| Thickness of Material(mm) | 0.5-4.5 |
| Max.coil Weight(kg) | 2Tweight can be customized | 3Tweight can be customized | 5Tweight can be customized | 8Tweight can be customized |
| Coil L.D.(mm) | 508 |
| Max.Coil O.D.(mm) | 1500 |
| Max.Speed(m/min) | 16 |
| Feed Pitch Accuracy(mm) | ±0.15 |
| Feed ROLL | Upper1 / Lower1 |
| Straighten ROLL | Upper4 / Lower3 |
| Voltage | 380VAc / 60Hz |
| Air power supply | 5kg / CM² |
| Uncoiler Expansion | Hydraulic |
| Servo Motor(kw) | AC2.9with servo reducer | AC4.4with servo reducer | AC5.5with servo reducer |
| Uncoiler Motor(kw) | 1.5 KW | 2.2 KW | 3 KW |
| Coil Car | 1 optional | standard |
| Pass line | ±100 MM |
| Model/Width/Thickness | 0.5 | 1.5 | 2 | 2.5 | 3 | 3.5 | 4 | 4.5 |
| TNCF4-300 | 300 | 260 | 200 |
| TNCF4-400 | 400 | 300 | 260 | 200 |
| TNCF4-500 | 500 | 400 | 300 | 260 | 200 |
| TNCF4-600 | 600 | 500 | 450 | 350 | 260 | 200 |
| TNCF4-700 | 700 | 550 | 450 | 350 | 260 | 200 |
| TNCF4-800 | 800 | 600 | 450 | 350 | 260 | 200 |
| TNCF4-1000 | 1000 | 800 | 600 | 450 | 350 | 260 | 200 |
| TNCF4-1300 | 1300 | 900 | 600 | 450 | 350 | 260 | 200 |
