High Temperature Gasket Maker Manufacturer/Factory
Good adhesion and flexibility
Replaces most cut gaskets
Non-flammable,
PRODUCT DESCRIPTION:
FL High Temperature Gasket Maker is a single component, room temperature vulcanizing (RTV )gasketing compound designed to provide reliable formed-in-place gaskets for mechanical assemblies.
This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking.
Designed to perform under the higher load conditions of engines with closely spaced bolt patterns (typically non-US designed), and maintains outstanding oil, water-glycol resistance. OEM Specified.
PRODUCT BENEFITS
• High load resistance
• Improved oil resistance
• Sensor safe, non-corrosive
• Replaces most cut gaskets
• Can be used as a gasket maker or dressing
• Non-flammable, Non-toxic
• Low odor
TYPICAL APPLICATIONS
•Valve covers
• Transmission pans
• Oil pans
• Timing gear covers
• Differential covers
TECHNICAL DATA SHEET
| Tack Free Time (min) | 4 |
| Full Cure Time (3mm/h) | 22 |
| Density (g/cm⊃3;) | 0.98 |
| Hardness (Shore A) | 28 |
| Tensile Strength (Mpa) | 1.9 |
| Elongation at Break (%) | 400 |
| Volatile (%) | 18 |
