I.Introduction of 3 in 1 press feeder line
A automation equipment in high speed feeding coil for punch press. The machine is feeding levelling with uncoiling steel coil. The 3 in 1 whole line is controlled by PLC with computer display. We mainly apply computer-control system of brands Mitsubishi. This line can help to improve efficiency, lower cost and ensure quality. TNCF series has won wide market with its high performance and low price. The thickness of material can be from 0.2MM to 8MM, width from 150MM to 1600MM, highest precision ±0.15MM and speed 16M/min. This machine is applicable for processing of copper coil, aluminum coil, cold-rolled coil, hot rolled material, silicon steel, and stainless steel and so on.
II.LIST OF EQUIPMENTS UNDER SCOPE OF SUPPLY: 1.Coil car
2.Decoiler
3.Snubber Roller
4.Entry strip support device.
5.Loop senor
6.Side Guide Roller I
7.Feeder and straightener
8.Releasing functioning
9.Pass line adjust
10.Side Guide Roller II
11. Electrical System.
12.Pnematic system
13.Hydraulic system
III.Standard Accessory 1.upper roller adjustment by digital watch .
2.Coil width adjusted by double handle wheel with precise screw rod.
3. Pass line can be adjusted by the lifter driven by motor .
4.Coil side guide use one set hollow rolls mechanical back gauge device.
5. Pinch roll and straightener roll material:high-strength alloy bearing steel with hard chrome plating.
6.Hydraulic coil arm device .
7.Motorized Snuber roll .
8.hydraulic guider .
9.hydraulic peeler table .
10.Mitsubishi PLC control feeding program from Japan .
11.Feed accuracy controlled by Japan YASKAWA servo motor with precise planetary reducer .
IV.standard type | Ltem / Model | TNCF6-400 | TNCF6-500 | TNCF6-600 | TNCF6-700 | TNCF6-800 | TNCF6-1000 | TNCF6-1300 | TNCF6-1500 |
| Width of Material(mm) | 75-400 | 75-500 | 75-600 | 75-700 | 75-800 | 75-1000 | 75-1300 | 75-1500 |
| Thickness of Material(mm) | 0.8-8 |
| Max.coil Weight(kg) | 3T weight can be customized | 5T weight can be customized | 8T weight can be customized |
| Coil L.D.(mm) | 508 |
| Max.Coil O.D.(mm) | 1500 |
| Max.Speed(m/min) | 16 |
| Feed Pitch Accuracy(mm) | ±0.15 |
| Feed ROLL | Upper1 / Lower1 |
| Straighten ROLL | Upper4 / Lower3 |
| Voltage | 380VAc / 60Hz |
| Air power supply | 5kg / CM² |
| Uncoiler Expansion | Hydraulic |
| Servo Motor(kw) | AC4.4KW with servo reducer | AC5.5KW with servo reducer | AC7.5KW with servo reducer |
| Uncoiler Motor(kw) | 1.5 KW | 2.2 KW | 3 KW |
| Coil Car | optional | standard |
| Pass line | ±100 MM |
V.Straightener adjustment€ | Model/Width/Thickness | 0.8 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 7.0 | 8.0 |
| TNCF6-400 | 1 400 | 300 | 280 | 220 |
| TNCF6-500 | 1 500 | 350 | 280 | 220 |
| TNCF6-600 | 1 600 | 450 | 350 | 280 | 220 |
| TNCF6-700 | 1 700 | 550 | 450 | 350 | 280 | 220 |
| TNCF6-800 | 1 800 | 550 | 450 | 350 | 280 | 220 |
| TNCF6-1000 | 1 1000 | 800 | 600 | 450 | 350 | 280 | 220 |
| TNCF6-1300 | 1 1300 | 1000 | 800 | 600 | 450 | 350 | 280 | 220 |
| TNCF6-1500 | 1 1500 | 1000 | 800 | 600 | 450 | 350 | 280 | 220 |
