Product Description

• Brand Name: ZRsuns
• Application: Laser Engraving
• Laser Type: Laser
• ZR-130W CO2 laser power supplies
  Feature
  1. The laser tube\'s CO2 power supplies has stable working performance: Each high voltage  CO2 power supplies has been much more rigorous testing procedures, under full load high temperature (52~55 degrees Celsius) 24 hours of aging, to ensure the stability of each 130W CO2 power supplies
  2.This laser tube\'s CO2 power supplies have a built-in network cable interface, which can be used to connect with external LCD module through the network cable. The external LCD module can display the working status, output current and common fault codes. This is helpful for operators to understand the working status of 130W CO2 power supplies and quickly solve problems. The output current can be adjusted through the rotary potentiometer of the liquid crystal module.
  3. Good compatibility: The high voltage CO2 power supplies can drive EFR, Yongli, SPT, Weiju and other brand 1.6 or 1.65 meter length 130W CO2 laser tube and it also have a strong adaptability and fast response, cutting advantages of good effect.
  4. This laser tube\'s CO2 power supplies adopt G/P/L/G/IN/5V as control signal output interface.The high voltage CO2 power supplies adopts aluminum upper cover and base, and galvanized steel shell.
  5.Laser power control is simple on this laser tube\'s CO2 power supplies, 0-5V analog signal control the laser power can be used, It can also use the PWM (pulse width modulation) signal to control output laser power. 
  6. Protection function: This laser tube\'s CO2 power supplies have open circuit protection: Under the condition of good protective earth, the high voltage CO2 power supplies can work in open-circuit for a short time, which could avoid the damage to the 130W CO2 power supplies
  7. Control is simple: This 130W CO2 power supplies use high or low level control, the use of TTL-level control of the laser can start and stop. At the same time it increases the protection switch, testing is through the external water and ventilation on this high voltage CO2 power supplies
  Specification

  Input	Input voltage	AC220V±10% (AC110V specified while order)
  AC frequency	47~440HZ
  Maximum input power	970W
  Maximum input current	4.3A
  Output	Maximum output voltage	40KV
  Maximum output current	36mA (depending on the laser tubes of different manufacturers)
  Efficiency	More than 90% (Full load)
  Response speed	Not more than 1ms
  Control lnterace	TTL multilevel switching control, effective level can be high and low selection (see control wining diagram)
  Insulation	lnput-output	AC 1500V 1 minutes not more than 10mA
  lnput-shell	AC 1500V 1 minutes not more than10mA
  Output-shell	Connection
  Open Circuit Protection	Can be short circuit (requires a good grounding shell, while avoiding the positive electrode and the shell between the arc)
  Environmental Requested	Working temperature	-10℃~50℃
  Storage of temperature	-20℃~75℃
  Relative Humidity	Maximum 85%RH (non-condensing)
  Altitude	100, 000 feet of work 200, 000 feet of storage, dose not work
  Cooling methods	Forced air cooling (fan cooling)
  Dimensions (LxWxH)	335mmx205mmx100mm

Company Profile

• Jinan Ruby Laser Technology Co., Ltd
• [ China ]
• This company is registered as a free member and is not verified or authenticated by Tradekey.com
• Jinan Ruby Laser Technology Co.,Ltd is main laser power supply manufacturer which was established at 2007. From then on ,she has more than 17 years experience to research & develop, produce and sell ZRSUNS brand CO2 laser power supply andother laser cutting or engraving machine accessories. At present, our CO2 power supply has three series products(ZR series,BR series and DY series).ZR/BR serie...
  

Basic Information

• Company Products / Services: co2 laser power supply, co2 laser tube, power supply for co2 laser tube, co2 laser power souce, laser engraving power supply, laser cutting power supply
• Year Established: 2015
• Number of Employees: 26-50
• Website: http://www.rlaserpowersupply.com