YELLOW HOT-MELT ROAD MARKING PAINT
RAW MATERIAL COMPOSITION
Medium Chrome Yellow:
Titanium oxide, Binder, Calcium Carbonate, Petroleum resin.
Additives: Glass beads, EVA, Quartz sand.
TECHNICAL SPECIFICATIONS
Relative density: 1.8-2.3
Softening point 90-140 degrees C.
Nonsticky tire time (min) < 3
Compressive strength Mpa < 12
Glass bead content is 30%.
Heating stability ~4 hours in stirring state at 200~220 C, without obvious yellowing, coking, caking and other phenomena.
No wrinkles, spots, bubbles, cracks, shedding or stickiness after coating colour and appearance drying.
Life span: 3-5years
PRODUCTION & TESTING STANDARDS OF HOT MELT COATINGS
China Standard JT/T 280-2004
Japanese Standard JISK5665
British Standards
Australian Standard
American Standard
DOSAGE OF HOT MELT COATINGS
Theoretical value 240㎡/ton
PACKAGING OF HOT MELT COATINGS
Plastic woven bag with plastic film 25Kg/bag
or
Kraft paper bag 25Kg/bag
ACCESSORIES FOR HOT MELT COATINGS
Special primer: Select special primer for hot-melt marking paint to increase the adhesion between pavement and paint and product strength.
Glass beads: Special glass beads for marking surface sowing are selected, with clear and transparent colour and refractive index greater than 1.5.
SUPPORTING CONSTRUCTION MACHINERY
This product is suitable for use with conventional heat-soluble road marking paint construction machinery, such as Hot-Melt Kettle, Scriber and base oil sprayer.
STORAGE
Hot-melt marking coatings are not suitable for long-term storage.
