POWER UNIT
Engine • Kirloskar make water-cooled electric start diesel engine, Model 4R 1040T, 76 hp (57 kW) @ 2200 rpm or equivalent
Electrical System • 12 V DC
Emission Standard • BS-III
Eight Speed Reduction Gearbox • Eight speed reduction gearbox
PERFORMANCE
Laying suitability • Option 1: Wet mix, GSB, DLC, DBM material
• Option 2: Bituminous
Laying Capacity • 150 TPH
Laying Thickness • 200 mm (Max) to 10 mm (Min)
• 8″ (Max) to 3⁄8″ (Min)
Transmission • Mechanical
Working Speed • 1.27 to 30 m/min (Max.)
Travelling Speed • 16 km/hr (Max)
Weight • 13, 200 kg (29, 145 lb) approx.
Slope & Grade Control • Manual mode
• Optional: MOBA, Germany make electronic sensor
Maintenance Shutters • On two side of machine
Traction & Conveyor Pump Motor • Sauer Danfoss, Germany or equivalent
SCREED
Screed width • 2.5 m (8′ 2½) basic width, Hydraulically extendable up to 4.5 m (14′ 9⅛), bolt on extension up to 5.0 m (165″)
Crown (Manual) • -1° / +4°
Screed Heating • Yes, with 8 LPG burner facility
Screed Vibration • Yes (Fix Speed)
Screed Tamping • No. Available on request.
UNDER CARRIAGE
Rear Wheel • Four no. Pneumatic Tyre
• Size: 10.00 x 20
Front Wheel • Four no. Solid Rubber Tyre
• 550 Dia. x 175 mm wide
REFILL CAPACITIES
Fuel • 105 L (23.2 gal)
Hydraulic Oil • 202 L (44.5 gal)
Cooling System • 6.5 L (1.4 gal)
Engine Oil • 14 L (3.0 gal)
OPERATOR STATION
Control Panel Type • Sliding
Operator Seat • Double
Travelling Function • Left & Right side
Operating Function • Left & Right side
Steering • Hydraulic
Brake • Caliper disc brake on both the sides
CONVEYOR & AUGER SYSTEM
Conveyor & Auger • 2 Sets, one on each side
Conveyor Drive • Hydraulic
Conveyor Control • ON / OFF switch function
Auger Screw Size • Dia 300 mm (12″)
Auger Material • Ni-Hard / High Chromium Steel Material
HOPPER & FEEDING SYSTEM
Hopper Operation • Hydraulic
Hopper Capacity • 4.25 m3 (151 ft3)
Hopper Width • Working: 3.220 m (10′ 6¾)
• Closed: 2.440 m (8′)
Feed Tunnel Width • 1.268 m (4′ 2″)
DIMENSIONS
Operating Height • 3.47 m (11′ 45⁄8″)
Shipping Height (canopy tilted) • 2.90 m (9′ 6¼)
(w/o canopy & exhaust) • 2.68 m (8′ 9½)
Shipping Width • 2.57 m (8′ 5¼)
Length (Tractor unit + screed) • 6.67 m (21′ 10½)
Wheel Base • 2.61 m (8′ 67⁄8″)
Dump Height • 0.70 m (2′ 3½)
Thrust Roller Height • 0.54 m (1′ 9¼)
MACHINERY ACCESSORIES
Canvas Canopy; Working & Traveling Lights; Tool Kit with Jack; Horn
OTHER FEATURES
Single Level control for speed gearing is provided which prevent dual engagement and breaking of gears; All operating levers including panel switch board are handy and within easy reach; All gears and shafts of gear box are made from alloy steel and are hardened and ground for efficient working; Screed is vibrated with hydraulic motor to compact laid layer; All jacks are having same kind of seal kit (Piston seal and rod seal of PU material).
