TECHNOCRETE SB IS USED IN COMBINATION WITH INORGANIC BINDERS SUCH AS CEMENT, LIME AND GYPSUM. TECHNOCRETE SB IMPROVES WORKABILITY, WET ADHESION AND PLASTICITY OF FRESH MORTARS. THE DISPERSION HAS A STRONGLY LIQUIFYING EFFECT AND REDUCES THE WATER REQUIREMENT AT THE SAME MORTAR CONSISTENCY. TECHNOCRETE SB IMPROVES FOLLOWING END PROPERTIES:
1. FLEXURAL STRENGTH (UP TO 50%)
2. ADHESIVE STRENGTH
3. ABRASION RESISTANCE
4. WATER RESISTANCE
5. CHEMICAL RESISTANCE
6. FREEZE / THAW RESISTANCE
7. SHRINK / SWELL BEHAVIOUR
TECHNOCRETE SB HAS EXTREMELY GOOD RESISTANCE TO SAPONIFICATION, BY WHICH LONG TERM STABILITY IN THE STRONGLY ALKALINE REGION EVEN UNDER MOIST CONDITIONS IS SECURED. THE DISPERSION HAS NO CORROSION PROMOTING ACTION ON STEEL REINFORCEMENTS AND IS FILM FORMING ABOVE + 3C.
TECHNOCRETE IS USED IN
1. FLOOR SCREEDS, LEVELING COMPOUNDS
2. ADHESIVE BONDED JOINTS AND SEALERS / PRIMERS
3. REPAIR MORTARS FOR CONCRETE RESTORATION
4. CEMENT BASED ANTICORROSION PAINTS
5. GYPSUM BASED STOPPERS FILLERS
6. GYPSUM BASED FILLERS
7. BUILDING ADHESIVES
