Steel Jacket Edge Seal Epoxy Adhesive Steelchor 503
Product Description
- Steel Jacket Edge Seal Epoxy Adhesive
Item # SteelChor 503
Mixing: 3:1
Modified epoxy resin adhesive, two components, solvent free, can be used on moisture surface, especially for crack sealing.
Range of Application
Sealing the crack surface and grouting opening
Sealing the edges during bonding steel plate.
Filling and sealing the crack
Repairing and leveling the crack defects in concrete
Crack repairing for beams, poles and floors of new and old buildings. Assorted with XQ-GF grouting adhesive
Stone dry hanging construction
Features
Close to the concrete color
High self strength and bonding strength with concrete, good resistance to ageing and media
Solvent free, no shrink during hardening
Good thixotropic performace, no flowing for standing wall and roof
Can be used for both dry and moisture surface.
Product Performance
1 Main Performance
Testing project Condition Index Gel Performance Tensile Strength Under (23±2)℃、(50±5)%RH, tested by loading speed of 2mm/min ≥30MPa Tensile modulus of elasticity ≥1.5×103MPa Elongation ≥1.5% Bending Strength ≥40MPa
Compressive Strength ≥70MPa Bonding Capacity Steel-Steel Tensile Shear Strength (23±2)℃、(50±5)%RH ≥10MPa Steel-Steel bonding tensile strength (23±2)℃ (50±5)%RH C30, Ф25, L=150mm ≥32MPa C60, Ф25, L=150mm ≤35MPa Steel-Steel T-peeling strength (23±2)℃、(50±5)%RH ≥2.5mm (Concrete cohesion damage) Steel to C45 Concrete cohesive pulling strength ≥14MPa
Processing Flow:
Crack surface treatment → Mixing the adhesive → Sealing the cracks → Leveling
Packaging and Logistics
1. Two components in separate package, Mix ratio (weight) A:B=3:1 Shall be stored in cool (under 25℃), dry and ventilated place, not exceed 1 year. 3. Toxic free, non dangerous, can be shipped as normal chemical materials.
Attention:
1. Shall be stored in a dry, ventilated place and away from fire, Avoid upside down, sun exposure, rain and collide with sharp things.
2. Must wear protective gloves and masks, if accidentally touched by skin, please clean with acetone or alcohol, and washed by water, if accidentally splashed into the eyes rinse with plenty of water and seek immediate medical attention.
3. Do not mix the adhesive too much at each time.
Company Profile
- Xinchor Introduction
- [ China ]
- This company is registered as a free member and is not verified or authenticated by Tradekey.com
-
«©°¸½»¼º¡º§¾º¹¸¼¨¿»22¹¸¼»¬¸º
¿100,000¸ª¡¹®ã»¬¸»¦º§³»
¬¦º³»»ã»¤³»»ã¤¥³»»ã£¼¿®¤³»»ã¹®
¿2000¸¾
¼½
µ·¤¸º¼»¬·²¿ISO9001¨½³»¼¹¥½®®ª®¤
¨¥£µ¥ã«©°¬¿¨
¸¸½ã
22¹
»¬¸³¨º» º¡¸¼ ¸º¿¸¸ª¸¿½
¤¸º¼»¬¾«
¸º
¨³» ¾º¼»¥»¡³®·¦±ã
2¸ª...
Basic Information
- Company Products / Services: steel jacketing system
- Year Established: 2005
- Number of Employees: 101-500
- Website: https://www.xinchor.com/