Sincola SX30 dry mix wall putty machine india
Product Description
Introduction of wall putty machine india
SX30 Dry mixed Plaster Equipment is suitable for pumping and spraying the dry ready-mixed mortar witch is pump, such as Cement mortars, Lime plasters, Gypsum plasters, Masonry mortars, Insulating plasters, Self-leveling floor screeds, fireproof paint, etc. Plaster Equipment is a continuously working mixing machine, designed for the application of any type pumpabIe dry ready-mixed mortar based on cement, gypsum and insulating mortar.
Parameter of wall putty machine india
| Model | SX30 |
| Rated Output | 30 L/min |
| Rated Working Pressure | 3 MPa |
| Total power | 8.5Kw |
| Rev.of Rotor | 380 RPM |
| Rated Air Output | 250 L/min |
| Max horizontal delivery distance | 40m |
| Water Pump Rated Output | 700 L/h |
| Max aggregate size | 3mm |
| Hopper Capacity | 120 L |
| Loading Height | 1000 mm |
| Lengh of Conveying Hose | 20 m |
| Air Hose ID. | 13 mm |
| Conveying Hose ID. | 25/32 mm |
| Overall Dimension | 1240×680×1550 mm |
| Weight | 280 kg |
Features of wall putty machine india
1. The integrated machine with mixer, self-suck water pump, mini compressor and rotor/stator.
2. Machine continuously mixing and pumping machine.
3.Small size dimension and low weight, quickly and easily transport even in narrow spaces.
4.The rotor/stator ensures the material is pumped and sprayed out continuously and evenly.
5.The machine always works with efficiency and silence.
6.With air valve remote-control function.
7.The machine consists of portable units, permitting easy to operate and take maintenance and easy to use in any circumstance.
Working Principle of wall putty machine india
The dry materials is supplied in sacks and filled into the large hopper. the low height of the SX30 makes filling considerably easier.the materials is then transported by the agitator out of the hopper into the mixing pipe of the machine.the particular geometry of the agitator means the hopper can be emptied almost 100%.in the mixing area.the amount of water appropriate to the materials is supplied .depending on the mortar used.the amount of water can be separately regulated.the integrated water pump ensures the water pressure is always adequate.the mixing area is extremely large.this means the material is perfectly mixed and reaches the rotor/stator pump of the machine in an ideal condition .there it is then pumped at pressure through the mortar hose.the nozzle is connected in the end of mortar hose with compressed air.and then the mixed mortar is sprayed out evenly.the integrated mini compressor ensure the air pressure and consumption always adequate .as well as remote-control by air valve.
