POWER UNIT
Engine Kirloskar make water-cooled electric start diesel engine, Model 4R 1040T, 76 hp (57 kW) @ 2200 rpm or equivalent
Electrical System 12 V DC
Emission Standard BS-III
Speed Reduction Gearbox Two speed reduction gearbox to achieve low speed for paving and high speed for traveling
PERFORMANCE
Laying suitability Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material
Laying Capacity 125 TPH
Laying Thickness 200 mm (Max) to 10 mm (Min)
8″ (Max) to 3⁄8″ (Min)
Transmission Hydrostatic
Working Speed 0 to 24 m/min (Max.)
Travelling Speed 0 to 16 km/hr (Max)
Weight 9, 700 kg (21, 410 lb) approx.
Slope & Grade Control MOBA, Germany make electronic sensor
(Auto & Manual mode available)
Maintenance Shutters On two side of machine
Traction & Conveyor Pump Motor Sauer Danfoss, Germany or equivalent
SCREED
Screed width 2.5 m (8′ 21⁄2″) basic width, Hydraulically extendable up to 4.5 m (14′ 91⁄8″)
Crown (Manual) -1° / +4°
Screed Heating Yes, with 8 LPG burner facility
Screed Vibration Yes (Fix Speed)
Screed Tamping No. Available on request
UNDER CARRIAGE
Rear Wheel Two no. Pneumatic Tyre
Size: 11.00 x 20
Front Wheel Two no. Solid Rubber Tyre
550 Dia. x 175 mm wide
REFILL CAPACITIES
Fuel 76 L (16.8 gal)
Hydraulic Oil 192 L (42.3 gal)
Cooling System 6.5 L (1.4 gal)
Engine Oil 11 L (2.4 gal)
OPERATOR STATION
Control Panel Type Sliding
Operator Seat Double Operator Seat
Travelling Function Left & Right side
Operating Function Left & Right side
Steering Hydraulic
Brake Caliper disc brake on both the sides
CONVEYOR & AUGER SYSTEM
Conveyor & Auger 2 Sets, one on each side
Conveyor Drive Hydraulic
Conveyor Control ON / OFF switch function
Auger Screw Size Dia 250 mm (10″)
Auger Material Ni-Hard / High Chromium Steel Material
HOPPER & FEEDING SYSTEM
Hopper Operation Hydraulic
Hopper Capacity 4.25 m3 (151 ft3)
Hopper Width Working: 3.220 m (10′ 6 ¾)
Closed: 2.440 m (8′)
Feed Tunnel Width 1.276 m (4′ 2¼ )
DIMENSIONS
Operating Height .56 m (11′ 8⅛)
Shipping Height (canopy tilted) 2.70 m (8′ 10 5⁄16″)
(w/o canopy & exhaust) 2.68 m (8′ 9½)
Shipping Width 2.69 m (8′ 10″)
Length (Tractor unit + screed) 5.53 m (18′ 1¾)
Wheel Base 2.62 m (8′ 7¼)
Dump Height 0.70 m (2′ 3½)
Thrust Roller Height 0.57 m (1′ 10½)
MACHINERY ACCESSORIES
Canvas Canopy; Working & Traveling Lights; Tool Kit with Jack; Horn
OTHER FEATURES
All operating levers including panel switch board are handy and within easy reach; All gears and shafts of gear box are made from alloy steel and are hardened and ground for efficient working; Screed is vibrated with hydraulic motor to compact laid layer; All jacks are having same kind of seal kit (Piston seal and rod seal of PU material).