※Summery
The converter is plug-and-play without any jumper settingsThe converter is applicable for all the existing communication software and interface hardware withoutany software modifications for the previous working mechanism based on RS-232.A reliable and stable point-to-point and point-tomultipoint communication can be ensured by HighTek HK-5108 photoelectric isolation interface converter. For point-tomultipointcommunication, as many as 128 interface facilities of RS-422 or RS-485 standard can be connected to each converter, and a high data transmission rate of 300-115.2KBPS can be achieved. Power indicator light and data traffic indicator light are also available with the converter for malfunction indication. Two conversioncommunication modes including RS-232 to RS-422 and RS-232 to RS-485 are supported.
※Performance parameters
1. Interface characteristic: compatible with the standards of RS-232C and RS485/RS-422 issued by EIA/TIA.
2. Electric interface: DB9 female connector for RS-232 interface input end, DB9 male connector for RS-422/RS-485 interface output end.
3. Protection grade: +/-15KV ESD protection for RS-232 interface, and 600W surge protection each line for RS-422 and RS-485 interfaces.
4. Isolation degree: isolation voltage 2500Vrms 500DC non-stop.
5. Operation mode: asynchronous half duplex or asynchronous full duplex.
6. Signal indication: 3 pilot lamps for Power (PWR), Send (TXD) and Receive (RXD).
7. Transmission media: twisted pair cable or shielded cable.
8. Transmission rate: 115.2K BPS to 300M, 38.4K BPS to 2.4KMand 9, 600 BPS to 5KM.
9. Dimensions: 113mm*55mm*25mm.
10. Working circumstance: -40℃ to 85 ℃, relative humidity 5%-95%.
11. Transmission distance: 0-5, 000meters (115, 200bps-9, 600bps).RS-232C bay-line distribution