Specification of Virgin HDPE(film.blow molding.injection grade) Granule:
| HDPE cable material
Property | Unit |
Typical Value
|
| Mass density | g/cm³ | 0.941-0.959 |
| Melt flow Rate(190 Centigrade /2.16kg) | g/10min | ≤1.0 |
| Tensile yield strength | MPa | ≥19.0 |
| Flexural modulus | Mpa | ≥965 |
| Elongation@ break | % | ≥400 |
| Impact Embrittlement temperature | Centigrade | MAX -118 |
| Dielectric Constant | 100KHZ | 2.32 |
| 1MHZ | 2.31 |
| Loss Tangent | 100KHZ | MAX 0.0001 |
| 1MHZ | MAX 0.0001 |
| Volume resistivity | OHM-CM | MIN 1x10 15 |
| Application | Mainly used for the production of high toughness of the telephone, cable insulation material |
Application:
1.Injection product: the turnover box, bottle caps, barrel class, hats, food containers, plate, dustbin, box etc
2.Blow molding products: hollow molding products, such as various series blow molding barrel, containers,
bottles of class, cosmetics, the petrol tank, daily product, etc
3.Blow film product:Foodstuff packing bag, groceries shopping bags, chemical fertilizer lined with film, etc
4.Extruded product: Pipe, tube mainly used in gas transportation, public water and chemicals transport, such as
building materials, gas pipe, hot water drain pipe etc: sheet material is mainly used in the seat, suitcase,
handling containers.etc.
