TECHNICAL DATA
Colour : Several colours.
Mixing mass density : 1.34 kg/l
Mixing ratio(mass) : 4/1
Theoretical consumption rate : 1.2 kg/m2 ( for 1 mm)
All curing period : 6-8 hours (25°C)
Heat Resistance : Approx. 100°C (for cured product)
Shore A : 70 ±5
Application time : 5-15 minutes (Depends on temperature and humidity)
APPLICATION PROCEDURE
Surface must be clean, dry, free from grease. Mix 4 kgs of Component A and 1 kg Component B for two minutes with a low speed electric mixing paddle. It is important that two components mixed thoroughly. This mixture should be used in one application period (5-15 minutes). (Depends on air temperature) Squeegee or trowel should be used. Application temperature is 10°C - 30°C
SHELF LIFE
Shelf life is 12 months from the production date in appropiate conditions.
STORAGE
The product must be stored in sealed containers at 15-25°C.
Clean-up: All equipment should be cleaned after thinner, butyl acetate or ethyl acetate.
SAFETY DATA
Use protective goggles and gloves. Avoid contact with skin and eyes. Keep away from children. In case of skin contact, wash skin thoroughly with soap and plenty of water.
PACKAGING
20 kgs tin Component A 5 kgs tin Component B
