Introduction:
The EN ISO 1182 Non-combustibility test is one of the series of Euroclass test standards. This test specifies a procedure for determining whether or not a material will contribute directly to fire development and is relevant to classification of all building products (including floorings) into classes A1 and A2.
Features: Non-Combustibility Furnace measures incombustibility and combustibility of uniform building material and non-uniform building material of actual element. The evaluations (results) are rising temperature in the furnace, basic mass loss and ignition of specimen. Single Zone Furnace operable at up to 900 ℃ with the Kanthal Ribbon Heater. 750±5℃ temperature automatically control by PID and Power controller. Provided with stabilized voltage supply for more quick temperature stabilization. Equipped with 3 thermocouples, for temperature in furnace, specimen center, and specimen surface respectively 360 degree rotatable and height adjustable thermocouple scanning device; Inner furnace thermocouple device to calibrate the temperature of furnace. Testing results include Mass Loss(g) and Rate(%) 、Ignition Time(s) and Sustained Flaming(s) 、Initial & Maximum Furnace Temperature(℃) 、Final Furnace Temperature(℃) 、Maximum Specimen Center Temperature(℃) 、Final Specimen Center Temperature(℃) 、Furnace Temperature Rise(℃) 、Specimen Center & Surface Temperature Rise(℃).
Requirements: Electrical: 110V AC 60Hz / 230V AC 50Hz, 10A Ambient Temperature: Operating 10°C to 35°C Dimensions: 400 mm (W) x 400 mm (D) x 1200 mm (H) Control Unit:530 mm (W) × 270 mm (D) × 280 mm (H)