Professional to provide wellhead, joint station and gas station such as natural gas and gas purification and dewatering device.
Almost all of the natural gas wellhead flowing by gas phase water saturation, even carry a certain amount of liquid water. The presence of water in natural gas will often cause serious consequences: the presence of water containing CO2 and H2S gas formation under the condition of acid and the corrosion of pipeline and equipment; Natural gas hydrate formed under certain conditions and plug valves, pipes and equipment; Reduce the pipeline transmission capacity, causing unnecessary power consumption. The existence of water in natural gas is a very bad thing, therefore, more demanding need of dehydration.
Operating Principle:
Gas through the front filter dust, in addition to the water, the adsorption tower, using adsorbent super absorbency properties in low temperature and moisture in the gas adsorption, again through the rear filter shaker, achieve the goal of purification of natural gas. When the adsorption tower the tower adsorbent tends to saturation, need to take off the attached (regeneration), at this time to switch to another tower adsorption; After a small amount of purification of natural gas through the circulation fan pressure, then through heating into regeneration tower, regeneration tower water by high temperature gas out of the tower body, and after cooling and separation in addition to the water enters the adsorption tower, achieve the goal of regenerative without air.
Product features:
1, the structure of the twin towers, the pressure fluctuation is small, low noise, safe and effective;
2, the machine can realize semi-automatic, automatic operation, the operation failure rate is low;
3, reserved dew point detection interface, which can realize on-line monitoring;
4, able to design and manufacture according to user requirements;
Installation process and application scope:
Main air from the air inlet bullishness of liquid separator into A tower, gas dehydration after the rear filter have the outlet; Regeneration loop flow, gas through the circulation fan into heater, entered B tower regeneration after heating up, and then into the cooler, then through the separator gas water separation function back to the circulation fan inlet.
1, adapted to the medium flow rate;
2, is suitable for the vehicle gas medium moisture content of LPG stations
3, low in the high-pressure design;
4, automotive gas drying, dry gas pipeline door station;
5, don't stop all the work;
Two tower plant regeneration process automatic, semi-automatic type switch professional site for manual operation. This automatic regeneration combined with personnel manual operation process, the versatility is strong, good controllability, stable and reliable, flexible and regeneration of the characteristics of low gas consumption. Mother is a normal son QiZhan preferred model. Type automatic dewatering device in full automatic control process, the scene does not need to staff, safe and reliable operation, to adapt to demand a high degree of automation of LPG stations.
