POWER UNIT
Engine
Kirloskar make water-cooled electric start diesel engine, Model 4R 1040T, 76 hp (57 kW) @ 2200 rpm or equivalent
Electrical System
12 V DC
Emission Standard
BS-III
Eight Speed Reduction Gearbox
Eight speed reduction gearbox
PERFORMANCE
Laying suitability
Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material
Laying Capacity
100 TPH
Laying Thickness
200 mm (Max) to 10 mm (Min)
8″ (Max) to 3⁄8″ (Min)
Transmission
Mechanical
Working Speed
1.27 to 24 m/min (Max.)
Travelling Speed
16 km/hr (Max)
Weight
9, 400 kg (20, 780 lb) approx.
Slope & Grade Control
Manual
Maintenance Shutters
On two side of machine
SCREED
Screed width
2.5 m (8′ 2½) basic width
Hydraulically extendable upto 4.5 m (14′ 9⅛)
Crown (Manual)
-1° / +4°
Screed Heating
Yes, with 8 LPG burner facility
Screed Vibration
Yes (Fix Speed)
UNDER CARRIAGE
Rear Wheel
Two no. Pneumatic Tyre
Size: 11.00 x 20
Front Wheel
Two no. Solid Rubber Tyre
550 Dia. x 175 mm wide
REFILL CAPACITIES
Fuel
124 L (27.3 gal)
Hydraulic Oil
46 L (10.1 gal)
Cooling System
6.5 L (1.4 gal)
Engine Oil
11 L (2.4 gal)
OPERATOR STATION
Control Panel Type
Fixed on Right side
Operator Seat
Single Operator Seat on Right Side
Travelling Function
Right side
Operating Function
Right side
Steering
Hydraulic
Brake
Caliper disc brake
CONVEYOR & AUGER SYSTEM
Conveyor & Auger
2 Sets, one on each side
Conveyor Drive
Mechanical
Conveyor Control
Lever provided on right side
Auger Screw Size
Dia 250 mm (10″)
Auger Material
Ni-Hard / High Chromium Steel Material
HOPPER & FEEDING SYSTEM
Hopper Operation
Hydraulic
Hopper Capacity
4.25 m3 (151 ft3)
Hopper Width
Working: 3.220 m (10′ 6¾)
Closed: 2.440 m (8′)
Feed Tunnel Width
1.276 m (4′ 2¼ )
DIMENSIONS
Operating Height
3.30 m (10′ 10″)
Shipping Height (w/o canopy & exhaust)
2.21 m (7′ 3″)
Shipping Width
2.54 m (8′ 4″)
Length (Tractor unit + screed)
5.53 m (18′ 1¾)
Wheel Base
2.62 m (8′ 7¼)
Dump Height
0.80 m (2′ 7½)
Thrust Roller Height
0.58 m (1′ 107⁄8
MACHINERY ACCESSORIES
Canvas Canopy; Working & Traveling Lights; Tool Kit with Jack; Horn
OTHER FEATURES
Single Level control for speed gearing is provided which prevent dual engagement and breaking of gears; All operating levers including panel switch board are handy and within easy reach; All gears and shafts of gear box are made from alloy steel and are hardened and ground for efficient working; Screed is vibrated with hydraulic motor to compact laid layer; All jacks are having same kind of seal kit (Piston seal and rod seal of PU material).
