POWER UNIT
Engine
Kirloskar make water-cooled electric start diesel engine, Model 4R 1040T, 76 hp (57 kW) @ 2200 rpm or equivalent
Electrical System
12 V DC
Emission Standard
BS-III
Eight Speed Reduction Gearbox
Eight speed reduction gearbox
PERFORMANCE
Laying suitability
Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material
Laying Capacity
125 TPH
Laying Thickness
200 mm (Max) to 10 mm (Min)
8″ (Max) to 3⁄8″ (Min)
Transmission
Hydrostatic (option : Mechanical)
Working Speed
1.27 to 24 m/min (Max.)
Travelling Speed
16 km/hr (Max)
Weight
9, 400 kg (20, 780 lb) approx.
Slope & Grade Control
Manual mode
Maintenance Shutters
On two side of machine
Conveyor & Pump Motor
Sauer Danfoss, Germany or equivalent
SCREED
Screed width
2.5 m (8′ 2½) basic width
Hydraulically extendable upto 4.5 m (14′ 9⅛)
Crown (Manual)
-1° / +4°
Screed Heating
Yes, with 8 LPG burner facility
Screed Vibration
Yes (Fix Speed)
UNDER CARRIAGE
Rear Wheel
Two no. Pneumatic Tyre
Size: 11.00 x 20
Front Wheel
Two no. Solid Rubber Tyre
550 Dia. x 175 mm wide
REFILL CAPACITIES
Fuel
75 L (16.5 gal)
Hydraulic Oil
195 L (43 gal)
Cooling System
6.5 L (1.4 gal)
Engine Oil
11 L (2.4 gal)
OPERATOR STATION
Control Panel Type
Sliding
Operator Seat
Double Operator Seat
Travelling Function
Left & Right side
Operating Function
Left & Right side
Steering
Hydraulic
Brake
Caliper disc brake on both the sides
CONVEYOR & AUGER SYSTEM
Conveyor & Auger
2 Sets, one on each side
Conveyor Drive
Hydraulic
Conveyor Control
ON / OFF switch function
Auger Screw Size
Dia 250 mm (10″)
Auger Material
Ni-Hard / High Chromium Steel Material
HOPPER & FEEDING SYSTEM
Hopper Operation
Hydraulic
Hopper Capacity
4.25 m3 (151 ft3)
Hopper Width
Working: 3.220 m (10′ 6 ¾)
Closed: 2.440 m (8′)
Feed Tunnel Width
1.276 m (4′ 2¼ )
DIMENSIONS
Operating Height
3.56 m (11′ 81⁄8″)
Shipping Height (canopy tilted)
2.70 m (8′ 105⁄16″)
(w/o canopy & exhaust)
2.62 m (8′ 7¼)
Shipping Width
2.69 m (8′ 10″)
Length (Tractor unit + screed)
5.53 m (18′ 1¾)
Wheel Base
2.62 m (8′ 7¼)
Dump Height
0.70 m (2′ 3½)
Thrust Roller Height
0.57 m (1′ 10½)
MACHINERY ACCESSORIES
Canvas Canopy; Working & Traveling Lights; Tool Kit with Jack; Horn
OTHER FEATURES
Single Level control for speed gearing is provided which prevent dual engagement and breaking of gears; All operating levers including panel switch board are handy and within easy reach; All gears and shafts of gear box are made from alloy steel and are hardened and ground for efficient working; Screed is vibrated with hydraulic motor to compact laid layer; All jacks are having same kind of seal kit (Piston seal and rod seal of PU material).