Detailed Product Description
LP3600 three-axis digital compass
First, Characteristics of the Product
Using the three-axis magnetoresistive sensor to measure the spatial magnetic field with the two-axis title compensation.
Built-in soft magnetic compensation.
High-speed and High-precision A/D conversion; measuring accuracy of the magnetic field is 100μ Guass.
Simple and effective user’s calibration instructions.
Zero pointing correction.
The range of working temperature is between -40°C and +80°C, and the storage temperature is between -50°C and +100°C.
Second, description of the product
LP3600 compass sensor used are: three-dimensional and two-dimensional angle sensor magnetoresistive sensor. Among them, the magnetoresistive sensor measuring Earth's magnetic field, inclination sensor compass attitude. Output point is the compass point north axis in the horizontal plane of projection and magnetic north line of the angle between the ground projection.
As the magnetic compass is based on principles of magnetic heading angle calculated to reduce or eliminate the interference of its output accuracy of the magnetic field is applied in the project must be addressed. Affect the precision electronic compass orientation of factors, such as the magnetic sensor installation error, inherent magnetic compass device data acquisition and conversion error (collectively referred to as electrical error), the non-existence of multi-axis orthogonal magnetic sensor error, interference caused by magnetic field Luo poor. For the installation error, electrical error, non-orthogonal error, you can improve the design, manufacture and installation of technology and other measures to eliminate or weaken its compass heading accuracy. Use of the environment caused by ferromagnetic media in magnetic field caused by magnetic interference of Compass is a compass heading accuracy of the largest and most difficult to control.
