LED Sync Dimmer with RF button remote
RFBT001-DIM adopts the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. For instance, point source of light, flexible light strip, led modules, led strings and so on. Belong to low-voltage DC power input and output with two interfaces, including V+ is the positive interfaces, the other one for the negative interface. Meanwhile, you can turn on/off, adjust brightness for different lighting effects through RF 14keys remote control. In addition, It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips. In theory, they can be connected numerous.
Product Feature Designed for single color constant voltage LED lights, Working voltage DC12-24V. High watt output design, up to 1*25A/ 300W. Memory function, each time power-on reserve the mode which stop in the last power-down. Easy connection to achieve multiple dimmers sync-work by RJ45 terminal. Adopts RF 14keys remote control with fashion appearance, no need line-of-sight. Control range up to 20 meters. Long-press the brightness and speed key can get the fast adjustment, convenient for operation.
Direction for use Connect the load wire at first, followed by the power wire; Please ensure short circuit can not occur between wires before turning on the power； Adopts RF remote technology, 14 buttons in total.
Matching code operation
If unique-control or new-coded-remote is needed, pairing the remote and the receiver as below operation instruction before using: Step 1: Pressing key set and hold on, power on the controller, the load LEDs will be 50% brightness white as responding. Step 2: Continuously to press the keyMode key for 3 times within 5 seconds after step 1 , the brightness of LEDs will change from 25% -10% as responding. Code learning successfully, the LEDs will be back to the status before the power off, and the receiver only can be control by the remote. If not, please re-operate from step 1 to 2.
Clear code operation
Back to factory default, wall-panel can be controlled by any one the same remote control. Step 1: Pressing key set and hold on, power on the controller, the load LEDs will be 50% brightness white as responding. Step 2: Continuously to pressDelay button3 times within 5 seconds after step 1 , the brightness of LEDs will change from 25% -10% as responding. Code clearing successfully, the LEDs will be back to the status before the power off, and the receiver can be controlled by any remote control(any one the same remote control can be used to clear the code). If not, please re-operate from step 1 to 2.
