1. This allows you to simultaneously monitor your low birthweight twin infants in one incubator. A large mattress allows the cilnician the sufficient spaces for caring both babies and provides enough room for both infants to grow comfortably.
2. Double wall type
3. The controller module receives the data such as air temp., skin temp., and humidity from the sensor box. These data are displayed on large LEDs of the control panel.
4. The humidity reservoir is removable. It makes it easier to replace humidification water with fresh water and clean the reservoir.
* Specification
1. Power source : AC 220V, 50/60Hz
2. Power consumption
-. Heater 450W, Controller 60W, Humidity 23W
3. Control mode : Air/Skin Mode
4. Warm-up time : ≤25min.
5. Oxygen concentration : 21 ~80%
6. Water capacity : 1500ml
7. Skin Temperature : Display range 22~45℃, Control range 34~37℃
8. Air temperature : Display range 5~50℃, Control range 20~37℃
9. Humidity control : Display range 30~90%, Control range 30~90%
10. Dimension
-. Hood : W800 X H480 X D500mm
-. Cabinet : W1, 016 X H701 X D642mm
-. Mattress : W600 X D382mm
11. Mattress tilting angle : 0~12˚
12. Noise level in hood : ≤47dB(A)
13. Fuse : 250V, 4A
14. Air filter : 0.5㎛
15. Weight : Approx. 80Kg
16. Hood system : Double wall type
17. Control type : Microprocessor
18. Alarms(LED) : Power fail, system fail, Sensor fail, Over. Temp. fail, Air flow fail,
Air temp. fail, Skin temp. fail, Low-water
* Standard Accessory
1. Filter : 1 pc
2. Skin Temp. probe : 1 pc
3. Fuse : 2 pcs
4. Dust cover 1 pc
5. Manual 1 copy
