Introduction of Wood Chipper Machine:
TCGX series Drum Wood Chipper is one kind of special equipment for producing wood chips, widely used in the raw material preparing process in the factories of flakeboard, fiberboard, papermaking and wood chips making plant.Small drum type wood chipper is the best equipment for factory's laboratory preparing material.
Features of wood chipper machine:
1.Flexible adaptability.The design of this machine avoids making the foundation.And it is suitable for many different conditions, it does not influenced by weather and other external conditions.
2.Drum wood chipper has limit feeding door dimension , for example TCGX216 feed door size is 230*500mm, means raw wood logs should be smaller than 23*50cm , but length no limit, feeding speed can be adjusted.
5.Drum wood chipper is hot selling more than 8500sets per year, greatly welcome to ask me for details, have big discount if order large quantity.
3.Drum wood chipper has knives grinder, which can grind knives newer after certain time, then no need to change knives often.The full unite contains 4m length feeding conveyor , outlet conveyor, knives grinder, electrical control cabinet ect.
4.Drum wood chipper is mainly used to crush big wood logs or wood timber, wood branches, furniture waste into small chips , the thickness of last chips is 1.5mm-3mm, length and width about 20-50mm, by adjusting knives gap , outlet chips dimension will be adjusted.
Technical data of wood chipper machine:
| MODEL | TCGX215 | TCGX216 | TCGX218 | TCGX2113 |
| FEEDER SIZE(mm) | 160*400 | 230*500 | 300*680 | 450*700 |
| QTY OF FLY KNIVES(PCS) | 2 | 2 | 2 | 2 |
| SPEED OF KNIVES RUNNIN(R/M) | 592 | 590 | 650 | 500 |
| MAX DIAMETER FEEDER (mm) | 160 | 230 | 300 | 450 |
| WOOD CHIPS SIZE ABOUT(mm) | 30 | 30 | 30 | 38 |
| CAPACITY (T/H) | 3-4 | 7-8 | 12-15 | 15-30 |
| MAIN POWER (KW) | 45 | 55 | 110 | 160 |
| FEEDER POWER (KW) | 2.2-3 | 3-4 | 4-5 | 7.5*2 |
| OIL PUMP POWER (KW) | 1.5*1 | 1.5*1 | 1.5*1 | 3*1 |
| WEIGHT (KG) | 2990 | 4070 | 7000 | 11840 |
| MACHINE OUTER SIZE (MM) | 1470*1550*970 | 1800*1900*1210 | 2200*2150*1500 | 3700*2600*2200 |
| BACK CONVEYOR POWER (KW) | 3 | 3 | 3 | 4 |
Working Principle of wood chipper machine:
This machine is made up of feed inlet, upper cover, rotor, hammers, pin roll, outlet, motor, base, fan blower and cyclone etc.
Materials fall into the crushing room through feed inlet.Ther are crushed under the action of high
Speed rotating hammer blowing and screener friction, go through the screener hole and discharge
From the outlet unser the action of centrifugal force and flow.
