Hot Rolled Low Carbon Steel 50 - 100 Mm Welded Pipe Production Line
1. 50 - 100 Mm Welded Pipe Production Line General Introduction
Dia 50 - 100 mm high frequency welded pipe mill line is used to manufacture welded steel pipe.After we absorbed advanced pipe making technology from both abroad and domestic, our innovative designed production line and each single unit of the production line is not only economical but also practical.
square pipe size: 50 x 50 - 100 x 100 mm Pipe thickness: 1.5 - 4 . 0 mm
2. 50 - 100 Mm Welded Pipe Production Line Main Parameters and Specifications
⑴ Material Specifications:
| Material |
low carbon steel galvanize and crabon steel tube |
| Mechanical properties |
σb≤520Mpa, σs≤365MPa
|
| strip width |
200 - 400 mm |
| strip thickness |
1 . 5 - 4 . 0 mm |
| I.D of Coils |
Φ 508 - 610 mm |
| O.D of Coils |
φ 2000 mm |
| Coil Weight |
≤ 10T |
⑵ Welded Pipe Specification
| Square Pipe Diameter |
Φ 50 ～ φ 100 mm |
| pipe thickness |
1 . 5 - 4 . 0 mm |
| Finish pipe length |
4 - 12 m |
| Cut length accuracy |
± 3 mm |
| Forming speed |
15 - 60 m/min |
⑶ workshop require : 100 m X 6 m , at least 5m high
Notice:You can modify it according to the actual length of the workshop
3.Equipment Customization Pic
