Product Description

• Brand Name: Gypsum board production line
• The main process of Gypsum board production line includes:
    Put Calcined Gypsum powder, water and other additives to mixer by automatic metering system and conveying system, mix to form the Gypsum slurry, evenly scattered on the surface of the continous forward movement of the protective paper; With continuous moving and vibrating, Gypsum slurry gradually diffused and evenly scattered on the surface of moving bottom paper. Then it goes into the Forming machine and compund with top paper. By the process of extruding and forming, the slurry would be sealed by top paper and bottom paper. Then pulpous continous plasterboard is formed. While it conveyed by setting belt, wet Gypsum board gradually formed after board shaping, natual coagulation and automatic cutting. The wet boards arranged by programmed control system, quickly enter into dryer through rollers, belt conveyor and board turnover. Under strict controls in temperature zones of dryer, the wet board dried by different temperature hot air blow. The wet board keeps evaporating, modified starch would stick with the paper, then the dry Gypsum board would be transported out of dryer. Then the board will be turned over again and folded together(Face inward), cut the board to certain size and edge sealed. Finally it comes to automatic stacker for stacking, then it can be transported to warehouse by forklift.

   

  SPECIFICATIONS GYSPUM BOARD MAKING MACHINE
  Raw Material	gypsum powder	100 mesh
  Paper	170gsm and 180gsm for gray paper and ivory paper
  modified starch	water reducer, white latex, etc.
  	Glue	PVA emulsion
  Gypsum Board Spec.	Length	Width	Thickness
  1800 to 4000mm	1200mm, 1220mm,	7mm to 15mm
  adjustable	adjustable
  Product Quality Standard	In conformity with standard of P.R.C GB/T9775-2008 paper-covered Plasterboard.
  Fuel Variety	Coal, fuel oil, natural gas or liquefied petroleum gas.
  The output of the Gypsum board producing line (Standard of our factory )	from 1.5 million to 30 million square metres annually (The estimated machine floor area is 1500-9600 square meters.)
  Machine Core component	PLC system/Automatic/ Different countries have different voltages
  Type of Drying system	The hot air drying type	suitable for production lines with an annual output less than 5 million square meters; low cost and low investment.
  Thermal oil drying type	Suitable for large and medium-sized production lines with an annual output more than 5 million square meters; Low energy consumption, higher cost, the service life is long, the quality is easy to control.
  Application	Building material machinery
  Installtion	We will dispatch technicians to install and debug the machine until it can normally produce qualified products.

  
  
  
  Cases we served
   

  Country	Production line description
  Indonesia	Annual output of 5 million sqm Gypsum board production line in 2017
  Uzbekistan	Annual output of 5 million sqm Gypsum board production line in 2017
  Ukraine	Annual output of 4 million squm Mineral wood board production in 2010
  Belarus	Annual output of 4 million sqm Gypsum board production line in 2017
  Russia	Annual output of 3 million sqm Gypsum board production line in 2015
  Kuwait	Annual output of 5 million sqm Gypsum board production line in 2017
  Pakistan	Annual output of 3 million sqm Gypsum board production line in 2013
  India	Annual output of 8 million sqm Gypsum board production line in 2017
  Iran	Annual output of 3 million sqm Gypsum board production line in 2014
  Iraq	Annual output of 6 million sqm Gypsum board production line in 2014

  
  
  
  Application
  
  Paper-facted Gypsum board has good toughness, non-combustible, stable size, smooth surface, can be sawn, easy to construction. Plaster board can be used as partition wall application, has good sound insulation ability, sound insulation effect is very good, can be compared to 24cm thick brick wall, gypsum board ceiling itself is made of gypsum of Paris as raw material, belongs to non-combustible material, fire safety performance is very good, raw material itself is porous material, also has good heat insulation effect, so its net weight is especially light, Only a third of the weight of a brick wall.
  
  
  
  Advantage
    Professional mechanical factory, 24 years production experience; R&D department, can offer production line drawings and accept customization; High-tech enteriprise, guarantee product quality; Main market: Iran, India, Russia, Uzbekistan, Tajikistan etc. Installation, we dispatch the installation engineer and teach you how it works; After-sale sevice, we will be always at your service. Now we can make the gypsum board to 7.5kgs/㎡ with thickness of 12.5mm.

Company Profile

• Hebei Xiangyi Mechanical Co., Ltd
• [ China ]
• This company is registered as a free member and is not verified or authenticated by Tradekey.com
• Xiangyi Mechanical mainly ranges of Gypsum board/powder production line, Calcium silicate production line and Egg tray machine, experienced engineers and skillful workers make us do better and better in the machinery industry. Xiangyi Mechanical is a young team, leaders has been committed to the machinery industry since graduation. More than 20 years of time, leading engineers and technicians...
  

Basic Information

• Company Products / Services: gypsum board production line
• Year Established: 1995
• Number of Employees: 51-100
• Website: https://www.xiangyimechanical.com