Frac hose
Through-the-weave TPU Hose
Cover and Lining: TPU, Ribbed cover or smooth cover
Reinforcement Jacket: High tenacity synthetic jacket.
Application: Irrigation, Sludge discharge, Liquid fertilizers discharge, Supply or Drag hose.
Standard length: 30m (100ft), 61m (200ft), 91.5m (300ft), 100m (330ft), 200m (660ft), 300m (990ft), 400m (1320ft).
This hose is lighter then Nitrile marking for easier handling, less wear and tear on deployment equipment, and more durable to varied terrain problems which gives you a lot more bang for your buck. The critical benefit of this line is that it will not elongate under pressure and therefore will not snake off its dedicated path. Where you deploy it, it stays!
This is due to the molecular make up of the line. Polyurethane is a multi-bond polymer, what this means to you is a strong molecular bond that resists losing its shape and is very abrasion resistant. You can expect an increase in diameter the first time you pressure the line up, and it will then retain this to a degree. You wont see elongation of the line to a significant degree, this solves the problem of the line moving off its laid path and snaking. Polyurethane serves the user with more longevity, and much lower risk of failure and collateral damage over traditional aluminium pipe.
| I.D. | Tolerance | Wall Thickness | Service Pressure | Minimum Burst Pressure | Weight | Tensile Strength |
| inch | mm | mm | inch | mm | Bar/psi | Bar/psi | Kg/m | lbs/ft | kgs | lbs |
| 4 | 102 | +2.5 | 0.16 | 4.2±0.3 | 13/200 | 39/600 | 1.6±0.2 | 1.08 | 17550 | 38802 |
| 5 | 127 | +3.0 | 0.17 | 4.5±0.3 | 12/160 | 36/480 | 2.0±0.2 | 1.34 | 22080 | 48943 |
| 5 1/2 | 140 | +3.0 | 0.17 | 4.5±0.3 | 10/150 | 30/450 | 2.3±0.3 | 1.55 | 22770 | 50486 |
| 6 | 154 | +3.0 | 0.18 | 4.6±0.3 | 10/150 | 30/450 | 2.6±0.3 | 1.75 | 27200 | 60296 |
| 7 | 178 | +3.0 | 0.18 | 4.6±0.3 | 10/150 | 30/450 | 3.0±0.3 | 2.02 | 35700 | 79146 |
