POLOY® 7001 (+)is a kind of environmental flame retardant ABS, which is used the environmental antimony tribromide flame retardant systerm. It hasgood flame retardance and high toughness. POULOY® 7001 (+) has pass the test of SGS, CTI and meet requirements ofRoHS, SVHC, PFOS&PFOA, 17P, Halogen-free and PAHs.
Application: Shells of electronical appliance, electronic products etc.
Properties | Test Standards | Units | 7001A | 7001B | 7001C |
Density | ASTM D-792 | g/cm3 | 1.18 | 1.18 | 1.18 |
Melt Flow Rate (260℃, 2.16KG) | ASTM D-1238 | g/10min | 60 | 65 | 75 |
Tensile Strength | ASTM D-638 | MPa | 45 | 40 | 50 |
Elongation at Break | ASTM D-638 | % | 30 | 40 | 25 |
Flexural Strength | ASTM D-790 | MPa | 55 | 55 | 65 |
Flexural Modulus | ASTM D-790 | MPa | 2400 | 2300 | 2500 |
Notched Izod Impact Strength | ASTM D-256 | J/m | 300 | 200 | 150 |
Flammability | UL94 | 1.5mm/3.0mm V-0 | Pass | Pass | Pass |
5VA/2.0mm | Pass | Pass | Pass |
Burning Test | IEC 60695-2-12 | GWFI 850℃,3mm | pass | pass | pass |
Pre-dry Condition | Injection Temperature | Injection Speed | Mold Temperature |
800℃(2 hours) | 190-210℃ | 60-80% | 40-50℃ |
Package/Storage: 25kg/package. Transportation should be based on Chemicals regulation. Keep it dry and cool environmental, avoid direct sunlight.
Remark: The above laboratory test data is only for reference, it’s not a formal quality assurance.