1.Introduction: Fiberglass CoveredMagnet Wire is the premium copper or aluminum wire to be wrapped with polyester film or polyimide film, then to be wrapped with single or double fiberglass. It should be impregnated incompatible insulating coatings of required thermal class，baked to make a whole between fiberglass, film and conductor. The product has high breakdown voltage and thermal classes of 130, 155, 180, 200. It is widely applied in reactors, transformers, electrical machines and other similar electrical instruments. 2.Standard: GB/T 7672-2008 3.Production Range: Copper or Aluminum Rectangular Wire Narrow size a: 0.30-5.60mm Wide size b: 2.00-16.00mm Copper or Aluminum Round Wire Diameter: Φ1.7-Φ6.0mm If specification is out of range, please dont hesitate to contact us. 4.Material: Aluminum rectangular wire should conform to GB5584.3-2009, the resistivity (20℃) is no more than 0.0280Ωmm²/m Copper rectangular wire should conform to GB5584.2-2009, the resistivity (20℃) is no more than 0.01724Ωmm²/m Insulation thickness and breakdown voltage are as follows,
Name
Insulation Thickness/mm
Deviation
Minimum Breakdown Voltage/V
Fiberglass Film Wrapped Wire
0.20
±15%
2500
0.30
-15%
0.40
5000
0.50
0.60
0.70
6000
0.80
0.90
Fiberglass film wrapped wire is bended on broad side and narrow side with the following rods.
This company is registered as a free member and is not verified or authenticated by Tradekey.com
We are the solution provider specializing in various magnet wires since 2004.Main products including Enamelled aluminum/copper wire, Other insulation (NOMEX,Paper,Fiberglass,Film) wrapped aluminum/copper wire, Ultra fine flat rectangular wire, Aluminum Foil.
The factory has a modern production and inspection equipment of the strict international standards IEC,NEMA,GB.The annual output of all...
