DKB-5L HDPE High Speed extrusion blow molding machine
Double Station
Single/
Double/
Triple/
Q.12
Head Horizontal Operated Clamping System Production Volume:2ml~5L Multi layers: Co-Extrusion 1-6 Layers Multi cavities: 1~12 cavities Specialize for the PE/PP/PETG/PVC/Nylon/Co-Extrusion material Special function: View Stripe Clamping system: Toggle/3 Tie Bar/4 Tie Bar Driven Model: Hybrid servo motor drive system/ High performance hydraulic power saving system/Close loop proportional valve Support Parison controller/Auto Deflashing/Auto Recycling/Auto material feeder/Remote trouble shooting funciton/IML(in mold labeling)
Advantages
Clamp sizes / quantity to match all requirements Easily configured for monolayer and multi-layer applications Single or multi parison Efficient electric drive(s) on extrusion system Low profile for ease of operator access Part removal and trimming matched to the application In-mold labeling and view stripe capable Lowest investment cost for high-speed applications Extreme bottle quality consistency
This series of models is a translational guide rail, man-machine interface, simple operation, and the oil circuit adopts the German imported servo energy-saving system. Single mold frame, double mold frame, single die to six die, single to six layers, multi-layer liquid level line, in-mold labeling, pneumatic watering device, and edge crushing automatic The recycling system and daily output (24 hours) range from about 0.5 to 86, 000, and can produce 0.2-5 (liter) plastic hollow products.
What is Blow Molding?
The process of blow molding follows the basic steps found in glass blowing. The blow molding process is designed to manufacture high volume, one-piece hollow objects. If you need to make lots of bottles, this is the process for you. Blow molding creates very uniformly, thin-walled containers. And, it can do so very economically.
Blow molding offers several distinct advantages including:
The costs in blow molding are lower as compared to injection molding
Machinery costs are typically lower as well
One-piece construction so that theres no need to connect part halves, which can achieve shapes that injection molding cannot produce
With blow molding, a plastic tube is heated and filled with air until it essentially becomes a balloon of hot plastic called a parison. A mold is then clamped around this, trapping the plastic while air continues to fill the parison into the shape of your part. The size of the machine and associated costs to produce a blow molded product is based on the weight of the plastic shot used in the mold.
blow molded parts
Blow molds have more design freedom between mold halves since each mold half forms its own wall shape. With blow molding, creating the mold is important but there are variables as well such as wall thinning, air leaks, flash, and streaks that must be monitored. For example, wall thickness variation is often an essential factor for product designers to consider. Quality control is an important part of the process. And, its important to look for a supplier that is qualified and trained to measure, monitor, and improves every aspect of the product.
blow moldingis widely taken for productionwater bottles, shampoo and other small bottles, automotive parts, stadium seating and chairs, watering cans, coolers, or any other type of hollow parts.
