| Model |
SV-200-12 |
SV-200-15 |
SV-200-24 |
SV-200-48 |
| Output |
DC Voltage |
12V |
15V |
24V |
48V |
| Voltage Tolerance |
±2% |
±2% |
±1.5% |
±1.5% |
| Rated Current |
16.7A |
13.5A |
8.5A |
4.2A |
| Current Range |
0~16.7A |
0~13.5A |
0~8.5A |
0~4.2A |
| Rated Power |
200W |
200W |
200W |
200W |
| Ripple & Noise |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
| Voltage ADJ. range |
10.8~13.2V |
13.5~16.5V |
21.6~26.4V |
43.2~52.8V |
| Setup, rise time |
200ms, 20ms/230VAC 200ms, 30ms/115VAC (at full load) |
| Hold up time |
30ms/230VAC 16ms/115VAC (at full load) |
| Input |
Voltage Range |
90-132V or 180~264VAC, 255~370VDC |
| Frequency |
47~63HZ |
| AC Current |
3A/115VAC 1.8A/230VAC |
| Efficiency |
86% |
86% |
86% |
86% |
| Inrush Current |
Cold start 50A/230VAC 30A/115VAC |
| Leakage Current |
< 3.5mA/240VAC |
| Protection |
Overload |
Rated output power 105%~150% start over load protection |
| protection type:Constant current limiting, recovers automatically after fault condition is removed. |
| Overvoltage |
Protection type:Output vltagedecline, recovers automatically after fault condition is removed |
| Environment |
Working temp., humidity |
-10℃~+60℃, 20%~90%RH non-condensing |
| Storage temp., humidity |
-20℃~+85℃, 10%~95%RH |
| Temp. Coefficient |
±0.03%/℃(0~45℃) |
| Withstand Vibration |
10~500Hz, 2G 10min./1cycle, period for 60min., each along X, Y, Z axes |
| Safety |
Withstand Voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolated Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25℃/70%RH |
| Compliance |
Safety Standard |
Compliance to UL1012 |
| EMC Standard |
Compliance to EN55022, Class B, EN61000-6-1 |
| Others |
Dimension |
245x69x43mm(LxWxH) |
| Weight/packing |
1.21kg/20pcs/24.5kg |
| Note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation. |
