The Steel Electric Pole Mould
1.Wear-resistant steel
2.7 m to 15 m
3.high strength, long service life
Electric-pole steel mould
The mould has the characteristics of high strength, good rigidity and durability etc., and it is an indispensable mould for making pre-stressing steel bar and concrete electric-pole, as well as non-prestressing steel bar and concrete electric-pole.
Working Principle
1. Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.
2. Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.
3. The speed of separation is slow when the viscosity of slurry is high.
4. It is good for centrifugal sedimentation when the slurry density is different in each component.
Technical Parameter
top end inner diameter (mm)
|
Tread (mm)
|
Running wheel diameter (mm)
|
Length (m)
|
150
|
2000
|
600
|
7-12
|
170
|
2000
|
600
|
7-12
|
190
|
2000
|
650
|
7-15
|
230
|
2000
|
650
|
6-9
|
300 equal diameter
|
2000
|
600
|
6-9
|
350 equal diameter
|
2000
|
650
|
6-12
|
310
|
2000
|
650-780
|