1, This product is alcohol ester high boiling point of organic
compounds
2, Model:GV100
3, Material Properties: This product is colorless transparent liquid of
low odor. It is insoluble in water and soluble latex particles. And it is
miscible with ethanol, ether, acetone, benzene, , ethyl esters
and other organic solvents.
4, Physical parameters:
Project Unit Physical constants
Appearance Colorless transparent, no mechanical impurities
Content % >=99.6
The boiling point centigrade 287
The moisture Wt% < =0.1
The proportion of 20/20centigrade 0.95
Free acid mgkOH/g < =0.1
Viscosity at20centigradec.p 12.0
The evaporation rate Butyl acetate=1 slowly
Flash point 160
Solubility GV100 in the water at20centigrade wt% < 0.06
Water in the GV100 at20centigrade wt% < 1.00
5, Properties and Use
GV100 filmforming additives used in waterborne polymer latex
paint, easily mixed with emulsion, and at higher levels, Does not affect
the stability of the coating;It is a strong solvent emulsion polymer.
a.Effectively reduce the minimum filmforming temperature of
emulsioni paint, The minimum filmforming temperature can reach
0centigrade ;
b.Effectively prevent coating cracking, Scrub resistance of film
adhesion, and has obvious improvement;
c.Can obviously improve the film forming performance, Increase
the gloss of paint film, strength and resistance to pulverization
performance and enhance the flow flat;
d.Excellent wet film performance, improve the weatherability and
show color performance;
e.Good storage stability and good freezethaw stability.
6, Scope of application
Widely used in pure acrylic, styrene acrylic, vinegar acrylic, silicon
a crylicacid latex;
Can be used as acrylic baking varnish and other baking varnish
solvent, In printing ink, textile dyes and advanced baking enamel do
high boiling point solvents;
GV100 filmforming additives in exterior latex paint, paint,
waterbased wood coatings, waterbased industrial paint, etc, are
widely used.
7, Method of use
Ordinary architectural emulsion, GV100 filmforming additives
added quantity for emulsion commonly addition amount of 3%
6%.No more than latex solid content of 12%, Will not affect the
stability of the emulsion;
Freezing point is very low, In the winter need not special
treatment;
In different construction seasons, different temperature, different
humidity, appropriate adjustments.If two to join, will give full play to
its functions.
a) Add 1/2 amount in grinding phase, will help yan/packing of
wetting and dispersing;
b) Add 1/2 amount in paint mixing phase, will help to suppress
bubbles.
8, Packaging, transport and storage
(1), This product use galvanized iron drum packaging, Net weight 200
kg.
(2), Should be handle with care during transportation, dont upside
down, Should avoid collision sunlight fell, prevent the rain, sun, And in
conformity with the relevant provisions of the ministry of
communications.
(3), Products are nontoxic, And dont belong to flammable, explosive
material.According to the general goods transportation.
(4), Contact with the skin, Rinse off with water and soap.
(5), This product should be kept in a dry ventilated place, storage
temperature should be lower than 50 centigrade.
(6), This article from the date of packaging, effective storage period
for two years.If the storage period of more than two years, according
to the index of the reinspection, if the result accord with a standard,
still can use.