HY1007系列温控器使用说明书。
1. Overview:
HY1007 series temperature controller is used to control the terminal system of large and small central air conditioning, mainly by adjusting the air volume of the terminal fan coil unit, the switching state of the water valve and the control of the air valve of the air duct unit, so as to achieve the purpose of adjusting the indoor temperature.
This series adopts mechanical diaphragm control technology, through the principle of thermal expansion and cold contraction of diaphragm, it has the advantages of accurate control, economy and practicality.
With cold and warm switching, room temperature detection, automatic control of fan or air valve function.
2. Model and function:
Type No. fan speed air valve switch water valve switch stop fan.
HY1007 manual three-speed automatic.
HY1007Y manual three-speed automatic.
3. Main characteristics and technical indicators:
Item gauge grid.
Control object AC fan, water valve, air valve, etc.
Operating voltage AC220V ±15% 50max 60HZ.
Rated current 3 (2) A.
Set temperature range from 10 ℃ to 30 ℃ (continuously adjustable).
Working temperature range 0 ℃ ~ 50 ℃.
Working humidity when ambient temperature is 20 ℃, humidity ≤ 90%.
Control precision ±1 ℃.
Wood quality milky white PC plastic.
Shape and size 128mmX85mmX38mm.
4. Wiring diagram:
5. Install the instance.
(1) remove the shell.
6. Appearance size:
7. Points for attention:
The wiring must be described in strict accordance with the wiring diagram.
It must be installed in a well-ventilated location with an elevation of 1.5 meters above the ground.
Avoid installing the thermostat at the air outlet, where there is sunlight or where there is a cold / heat source.
Please install this product vertically. Please confirm the upper and lower position before installation.
All wiring works should be completed before electricity is turned on.
Please reconfirm that the wiring is correct before the power is turned on after the completion of the wiring.
The installation and wiring of the surface shell should be undertaken by electrical professionals.
The terminal can accept a wire up to 1.5m thick.
HY1007 series thermostat instruction manual.
1. Overview:
HY1007 series temperature controller is used to control the terminal system of large and small central air conditioning, mainly by adjusting the air volume of the terminal fan coil unit, the switching state of the water valve and the control of the air valve of the air duct unit, so as to achieve the purpose of adjusting the indoor temperature.
This series adopts mechanical diaphragm control technology, through the principle of thermal expansion and cold contraction of diaphragm, it has the advantages of accurate control, economy and practicality.
With cold and warm switching, room temperature detection, automatic control of fan or air valve function.
2. Model and function:
Type No. fan speed air valve switch water valve switch stop fan.
HY1007 manual three-speed automatic.
HY1007Y manual three-speed automatic.
3. Main characteristics and technical indicators:
Item gauge grid.
Control object AC fan, water valve, air valve, etc.
Operating voltage AC220V ±15% 50max 60HZ.
Rated current 3 (2) A.
Set temperature range from 10 ℃ to 30 ℃ (continuously adjustable).
Working temperature range 0 ℃ ~ 50 ℃.
Working humidity when ambient temperature is 20 ℃, humidity ≤ 90%.
Control precision ±1 ℃.
Wood quality milky white PC plastic.
Shape and size 128mmX85mmX38mm.
4. Wiring diagram:
5. Install the instance.
(1) remove the shell.
6. Appearance size:
7. Points for attention:
The wiring must be described in strict accordance with the wiring diagram.
It must be installed in a well-ventilated location with an elevation of 1.5 meters above the ground.
Avoid installing the thermostat at the air outlet, where there is sunlight or where there is a cold / heat source.
Please install this product vertically. Please confirm the upper and lower position before installation.
All wiring works should be completed before electricity is turned on.
Please reconfirm that the wiring is correct before the power is turned on after the completion of the wiring.
The installation and wiring of the surface shell should be undertaken by electrical professionals.
The terminal can accept a wire up to 1.5m thick.
