Product Description
The tubular cnetrifuge separators throughput capacity of 200 to 3000 liters per hour for separating the waste water in the bilge
Bilgewater is created by leaks of salt water, cooling water, fuel oil and lube oil, by the dewatering of sedimentation and sludge tanks, by the draining off of various cleaning processes and also by particles of soot and dirt. Before there is any question of discharging this into the sea, IMO regulations specify that this explosive mix has to be treated so intensively that its residual oil content is below 15 ppm. However, this minimal pollution cannot be realized cost-effectively using conventional separation techniques.
The solution is the BilgeMaster system from our company. The separators of this system can cope with 200 to 7000 liters an hour and even in the standard version cut residual oil content to below the statutory minimum. Under normal bilgewater feed conditions, the residual oil content in the pure water effluent is 10 to 12 ppm. Add-on units make it possible to reduce the oil content to
GF Tubular Bowl Centrifuge is used for separating various liquids which are difficult for separation, especially suitable for liquid-liquid separation and liquid-liquid-solid separation.
It is a high-speed centrifuge with strong separating capacity. The bowl of the centrifuge rotates around its axis and forms a strong centrifugal force; The centrifugal force separates the suspension into liquids and solid.
The centrifugal force separates a mixture of two immiscible liquids that may contain fine suspended solids, in small quantities, heavier than either liquid.